Daily Use - Zanussi ZWP 581 User Manual

Daily use

Loading washing
• Open the lid of the
appliance.
• Open the drum by
depressing the
locking button A:
The two shutters
unlock automati-
cally.
• Load the washing,
close the drum and the lid of your washing
machine.
Warning! Before closing the lid of your
appliance, ensure that the drum is properly
closed :
• When the two shutters are closed,
• locking button A released.
Proportioning of detergents
Pour the amount of washing into the washing
and prewash
selected the "prewash" option. Pour fabric soft-
ener into the compartment
Selection of desired programme
Turn the programme selector to the required
programme. The "Start/Pause"
flashes green.
If you turn the programme selector to another
programme while a cycle is in progress, the ap-
pliance will ignore the new selected pro-
gramme. The "Start/Pause"
flashes red for a few seconds.
Selecting the spin speed
Press the "Spin"
speed, if you want your washing to be spun at a
different speed to the one selected by the ap-
pliance. You can also select the "Rinse hold"
option.
For the maximum spin speeds see "Washing
programmes".
Rinse hold
By selecting this function the water of the last
rinse is not emptied out to prevent the fabrics
from creasing.
www.zanussi.com
A
compartments if you have
if necessary.
pushbutton
pushbutton
button to change the spin
At the end of the programme, if you have selec-
ted the "Rinse hold"
lect a "Spin" or "Drain"
finish the cycle and empty the water.
Selecting options
You must select the different options after se-
lecting the programme and before pressing the
"Start/Pause" pushbutton (see "Pro-
grammes table"). Press the desired button(s) :
the corresponding lights come on. If pressed
again, the lights go out. If one of the options is
not compatible with the selected programme,
the "Start/Pause"
"Prewash" option
The appliance runs a prewash at 30°C max.
"Quick" option
The washing time will be reduced depending
on the programme selected.
"Extra Rinse" option
The washing machine will add one or more rin-
ses during the cycle. This option is recommen-
ded for people with sensitive skin and in soft
water areas.
"Delay start"
This option allows you to delay the start of a
wash programme by 3, 6 or 9 hours by press-
ing the "Delay start"
You can change or cancel the delayed start
time at any time before you press the "Start/
Pause" pushbutton by pressing the "Delay
start" pushbutton again (when all indicators
are off, the wash programme will start immedi-
ately).
If you have already pressed the "Start/Pause"
pushbutton and you want to change or can-
cel the delayed start, proceed as follows :
• To cancel the delay start and start the cycle
immediately, press "Start/Pause"
then "Delay start"
to start the cycle.
, you then need to se-
programme to
pushbutton flashes red.
pushbutton.
and
. Press "Start/Pause"
5