Defining Idle Session Timeout - Cisco Small Business 200 Administration Manual

5

Defining Idle Session Timeout

STEP 1
STEP 2
STEP 3
61
To view the device health parameters, click Status and Statistics > Health.
The Health page displays the following fields:
• Fan Status—Fan status. The following values are possible:
- OK—Fan is operating normally.
- Fail—Fan is not operating correctly.
- N/A—Fan ID is not applicable for the specific model.
• Fan Direction—(On relevant devices) The direction that the fans are
working in (for example: Front to Back).
Idle Session Timeout
The
session can remain idle before it times out and you must log in again to reestablish
the session.
• HTTP Session Timeout
• HTTPS Session Timeout
To set the idle session timeout of an HTTP or HTTPS session:
Click Administration > Idle Session Timeout.
Select the timeout for the each session from the corresponding list. The default
timeout value is 10 minutes.
Click Apply to set the configuration settings on the device.
Administration: General Information
configures the time interval during which the HTTP
Cisco Small Business 200 Series Smart Switch Administration Guide
Defining Idle Session Timeout