JVC KD-AR470 Service Manual page 40

Indications
SCROLL
1
*
Scroll
EXT IN 2
*
External input
AUX ADJ
Auxiliary input level
adjustment
TAG DISP
Tag display
AMP GAIN
Amplifier gain control
AREA
Tuner channel interval
1
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
2
* Displayed only when one of the following sources is selected—FM, AM, CD, or AUX IN.
14
Selectable settings, [reference page]
ONCE :
[Initial]; Scrolls the disc information once.
AUTO :
Repeats scrolling (5-second intervals in between).
OFF :
Cancels.
• Pressing D DISP for more than one second can scroll the display
regardless of the setting.
CHANGER :
[Initial]; To use a JVC CD changer, [9], an Apple iPod
or a JVC D. player, [16], a JVC compatible satellite
(SIRIUS/XM) tuner, [17].
EXT IN :
To use any other component than the above, [16].
A.ADJ 00 – A.ADJ 05:
to avoid the sudden increase of the output level when
changing the source from the external component
connected to the AUX input jack on the control panel.
[Initial: A.ADJ 00]
TAG ON :
[Initial]; Shows the ID3 tag while playing MP3/WMA
tracks, [10].
TAG OFF :
Cancels.
You can change the maximum volume level of this unit.
LOW PWR :
VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to prevent them from
damaging the speaker.)
HIGH PWR :
[Initial]; VOL 00 – VOL 50
AREA US :
[Initial]; Select this when using the unit in North or
South America, except for Middle South America.
(FM: 200 kHz; AM: 10 kHz)
AREA EU :
Select this when using the unit in any other area
than North, Middle South, and South America.
(FM: 50 kHz—manual tuning, 100 kHz—auto search;
AM: 9 kHz)
AREA SA :
Select this when using the unit in Middle South
America. (FM: 100 kHz; AM: 10 kHz)
Adjust the auxiliary input level accordingly,