D-Link DIR-300 Manual page 2

Setup port forwarding

Hide thumbs Also See for DIR-300:

1. First you will need a computer/laptop to be connected to one of the LAN Ethernet ports.

NOTE: Changing the Port Forwarding values can be performed under Wireless, however

we do not recommend it.

2. Proceed to open an Internet Browser and login to the DIR-300 Web Configuration.

NOTE: Instructions are on the Technical Support Knowledge Base if you are unsure on

how to login to the Web Configuration.

3. Before proceeding, you will need to know the actual Ports that your application

requires.

You will also need to know the IP Address of the computer/laptop that you would like the

Ports to be binded to. It is not recommended to have a Port Forward entry on a connected

computer/laptop without a Static IP Address assigned and or a DHCP Reservation setup

on the DIR-300. This guide will advise on the DHCP Reservation setup. To ensure your

computer/laptop always get the same IP Address, see below:

Click on SETUP > LAN Setup menu

D-Link Technical

Support – How to setup Port Forwarding on the DIR-300.

Page 2 of 4