Timer Recording - Philips VR 655 Instructions For Use Manual

Using On-Screen Display
You can display the VCR operating status on the TV
screen.
1
Select VCR Set Up Mode
1 Press VCR.
2 Press MENU. 5
3 Press PLAY or STOP
UP" then press OK/STATUS.
2
Select On-Screen Mode
5
1 Press PLAY or STOP
3
SCREEN MODE".
2 Press FF . Each time you press the button, the
setting changes.
ON:
When you press a tape running button (Stop,
Play, etc.), the VCR status appears for 5
seconds.
COUNTER:
When you press a tape running button, the VCR
operating status appears for 5 seconds.
After 5 seconds, the VCR status disappears
except the time counter.
OFF:
The VCR operating status does not appear even
if you press a tape running button.
3
Finish Setting
Press MENU.
To display the VCR status on the TV screen
manually, press OK/STATUS. The VCR status
appears for about 5 seconds.
• If "ON SCREEN MODE" is set to "OFF," no
VCR status appears though you press OK/
STATUS.
∞
to select "VCR SET
∞
to select "ON

Timer Recording

To record while you're away, follow step 1 — 9
below.
FOR EACH STEP BELOW, YOU NEED TO FINISH
WITHIN 60 SECONDS; OTHERWISE,
PROGRAMMING WILL HAVE TO BE RESTARTED
FROM STEP 1.
1
Select Timer Mode
Press TIMER. The Timer
Recording menu appears.
2
Select Programme mode
5
Press PLAY or STOP
select "QUICK PROGRAMM-
ING", then press OK/STATUS.
The Quick Programming menu
appears.
• If you have already set 8 programmes, "ALL
PROGRAMS IN USE" appears and goes back to the
Timer Recording menu. If this happens, delete
unwanted programmes.
3
Select Channel
5
Press VCR CH
• You can also use the ¡
FF/CH+ on the front panel. However, press CH
before pressing these buttons. Otherwise, it functions as
REW or FF.
• Holding down VCR CH
the channels.
∞
• To record from external line input, press VCR CH
until "A/V REAR" appears on the TV screen.
4
Select Start Time
Press START + or – (Number button 1 or 4).
• Each time you press the button, the set time changes by
one-minute intervals. If you hold the button, the set
time changes by 30-minute intervals.
5
Select Stop Time
Press STOP + or – (Number
button 2 or 5).
• Each time you press the button, the
set time changes by one-minute
intervals. If you hold the button,
the set time changes by 30-minute
intervals.
12
QUICK PROGRAMMING
PROGRAM REVIEW
SELECT:
END: TIMER
∞
to
ONE TIME PROGRAM
PROGRAM
CHANNEL+/–
START +/–
STOP +/–
REC SPEED SP
DATE +/–
DAILY: 8
CONFIRM: OK
∞
or to enter the TV channel.
1
REW/CH- and
5 ∞
or rapidly scans through
ONE TIME PROGRAM
PROGRAM
CHANNEL+/–
START +/–
STOP +/–
REC SPEED SP
DATE +/–
DAILY: 8
CONFIRM: OK
CONFIRM: OK
1
– –
– –:– –
– –:– –
– –/– –/– –
WEEKLY: 9
END: TIMER
5
or
1
12
20:00
22:00
– –/– –/– –
WEEKLY: 9
END: TIMER