Table of Contents
Advertisement
CCZ191/CCZ191comb.QX33
22 Remote Control Buttons
SLEEP Button
Press to set the sleep timer. Details are on page 37.
POWER Button
Press to turn on or off the TV/VCR.
Number Buttons
Use to select channels and to program TV/VCR functions (such
as setting the clock).
Channels 1 - 9
To select, press 0, then press the channel you want. For exam-
ple, to select channel 7, press 0, 7.
Channels 100 and above
To select, press the +100 button, then press the last two digits
of the channel you want. For example, to select channel 117,
press the +100 button, 1, 7.
SPEED Button
Press to select the recording speed (SP, LP, or SLP).
PLAY/
Button
Press to play a tape. Details are on page 28. Press to release
Search or Still mode and return to normal playback. Details are
on page 46. Press to select an item in the on-screen menu.
REW(ind)/{ Button
When tape playback is stopped, press to rewind the tape at
high speed. During tape playback, press to rewind the tape
while the picture stays on-screen. Details are on page 46.
Press to change a setting of a pop up menu item or to return to
a previous menu screen. Press to adjust the picture controls.
Details are on pages 24 - 25.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 29. Or,
press repeatedly to start a One-Touch Recording (an immediate
timed recording, 30 minutes to eight hours long) of the channel
you are watching. Details are on page 30.
MENU Button
Press to display the pop up menu. You may also use the buttons
on the front panel of the TV/VCR to access the pop up menu.
Details are on page 20.
STATUS/EXIT Button
Press to see the status display. Press again to remove the status
display. Details are on page 26. Press to exit the on-screen
menu.
• Buttons that are shaded in the illustration light up for five seconds when you press any button on the remote
control (CCZ191 only).
4/6/99 6:42 PM
Page 22
Helpful Hint
2
3
1
5
6
4
o
8
9
7
p
0
+100
o
p
o
PLAY
REW
F.FWD
STOP
p
o
p
Advertisement
Table of Contents
