Monitoring And Maintaining The Ip Network - Cisco Catalyst 2960 series Configuration Manual

Monitoring and Maintaining the IP Network

Command or Action
Step 5
show ip route
Example:
Switch# show ip route
Step 6 copy running-config startup-config
Example:
Switch# copy running-config startup-config
What to Do Next
Use the no ip route prefix mask {address| interface} global configuration command to remove a static route.
The switch retains static routes until you remove them.
Monitoring and Maintaining the IP Network
You can remove all contents of a particular cache, table, or database. You can also display specific statistics.
Table 80: Commands to Clear IP Routes or Display Route Status
show ip route [address [mask]
[longer-prefixes]]
show ip route summary
show platform ip unicast
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
676
Purpose
Displays the current state of the routing table to verify
the configuration.
(Optional) Saves your entries in the configuration file.
Displays the current state of the routing table.
Displays the current state of the routing table in summary
form.
Displays platform-dependent IP unicast information.