Page 1
SJM3151/10 www.philips.com/welcome EN U niversal remote and Universal remote and docking cradle for iPod™ 1 docking cradle for iPod™ 1 Universal remote and Universal remote and docking cradle for iPod™ 1 docking cradle for iPod™ 1 Universal remote and Universal remote and docking cradle for iPod™...
Table of Contents 1. Important 6. Warranty and service 2. Your universal remote and docking cradle for iPod™ 7. Technical data What’s in the box What you’ll also need 8. Frequently asked questions Universal remote and docking cradle for iPod™ overview Main menu overview 3. Getting Started Prepare Connect Install 4. Using your universal remote and docking cradle for iPod™...
Page 5
Hereby, Philips Consumer Electronics, BG P&A, declares that this SJM151 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. PHILIPS ELECTRONICS SINGAPORE PTE LTD Disposal of your old product: 07-EC-DSS1001/01 Your product is designed and manufactured with (Report no.)
It also allows you to control up to 6 • Control iPod™ through walls, floors, other AV devices. Philips offers an entire line of doors, ceilings and windows with 2-way RF products to enhance your iPod™ experience. technology.
2.1 What’s in the box. Universal remote control Docking cradle for iPod™ Power adapter 5 iPod™ dock adapters: * • type for mini • type 4 for 4G 20GB • type 5 for 4G 40GB • type 6 for iPod™ with color display 20GB/0GB •...
2.3 Universal remote and docking Cradle: cradle for iPod™ overview LED Indicator Slots for removing dock adapter .5mm A/V Out Jack DC Power Jack S-Video Out Jack iPod™connector Remote: Power key LCD Screen Mode key Cursor keys ( Navigation) and OK key Mute key POWER Volume Up/Down key iPod™...
Connect one end of the power cord to 3 Getting Started an electrical outlet and the other end to the DC 12V jack on the back of your Warning docking cradle. Carefully read the safety precautions in section Install the supplied AA batteries into the 1.1 Important, before connecting your battery compartment on the remote.
RCA Connection Initial set-up of your universal remote for iPod™: Select the language for your instructions on the remote using the cursor keys. Press S-Video Connection While pairing the remote to the docking cradle, position the remote within 1m of the dock for the duration of the procedure.
Page 11
Note You can adjust the settings of your universal remote for iPod™ anytime after initial install via the set-up menu. Press the MODE IPOD™ keys simultaneously for seconds. LAUNCH Select the device and brand of the device you want to add by using the cursor keys. Press .
Note 4. Using your universal remote If the No Connection icon begins blinking in the upper right-hand corner of the screen, and docking cradle the universal remote for iPod™ is not able to for iPod™ connect to the docking cradle for iPod™. See Section 8 Frequently Asked Questions to Learn how to operate your universal remote solve the problem.
Page 13
Press on the navigation dial to c. Repeat until you have made the > go to the next screen. selection you want to use. Selecting “Music” presents the following screens: Selecting “Now Playing” will display the Playlists most recently played song: Artists a.
Page 14
Note Below you can find a complete overview of the The Main Volume works like a short cut key to functions for all device specific keys listed for switch to either TV or AMP or RECEIVER mode. the IPod™ docking cradle, TV, cable/satellite and If more than one of these devices is installed, the your audio set.
Note device appear in the display screen. Other installed devices use the functions that To scroll through all the extra functions, are labeled on the remote. Check your original press the cursor up or cursor down key. remote when you are not sure. When you find the selection you want, press .
To add a device: 5 Use more of your universal Select the option “Add a Device” in the Set-up menu by using the cursor keys remote and docking cradle Press for iPod™ Note To access the advanced features of your If you have already added 6 devices on the universal remote and dock for iPod™, you must remote, besides your iPod™...
5.2 Deleting a device Note You can delete a programmed device from your If your universal remote for iPod™ has already universal remote for iPod™. learned 200 keys, a screen will alert you that the memory is full and automatically return you to To delete a device: the Set-up menu.
When all keys are fixed and you want to return iPod™ when you select the activity. You can to the Set-up menu, select “No”. Press add up to 8 activities. One activity can contain a maximum of 25 steps. Note Fixing a key overwrites the key’s data that was By default, your universal remote for iPod™...
5.6 Deleting an activity To delete an activity from your remote control: Select the option “Delete an Activity” in the Set-up menu by using the cursor keys Press Select the activity you want to delete. Press Confirm you want to delete the activity •...
• Deutsch RECONNECT bottom of the dock. After 5 seconds, the • Nederlands Philips logo on the dock will begin flashing. • Italiano Select “Yes” on remote. Press To change the language: Remote and dock will reconnect. When the Select the option “Change language”...
want to use the Volume keys of the Amplifier for 5.11 Performing a full reset the DVD. You can reset your universal remote for iPod™ completely, deleting all programmed devices, To change the volume keys: activities, learned keys and other settings. After Select the option Copy volume in the Set- the reset, you will have to configure your remote up menu by using the cursor Keys.
Page 22
6 Warranty & Service This universal remote and dock for iPod™ carries a limited one-year warranty. Philips warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for one year from the date of your purchase of this product.
Page 23
General Operating Voltage 7 Technical data • (min.) typical .V to 4.8 V Mechanical Specifications Ambient Operating Temperature Range • +5 C to 45 C Size Certifications Docking Station: • • Overall Length: 92.mm • • Overall Width: 94.2mm • UL/CUL • Overall Thickness: 28.5mm • • Swiss Mark Remote Control : •...
Page 24
25 minutes. for iPod™, check the following points before you contact Philips. If the problem remains How do I quit the installation wizard? unsolved, go to the Philips website To quit the installation wizard, press the IPOD™...
Page 25
iPod™ could be in standby mode. It may take some time for start-up after standby mode. Ensure that fresh AAA batteries are installed in the remote. What should I do if one or more keys are not working correctly? This usually means the specific function is not available on the original remote control. Keep in mind that your universal remote for iPod™...