Table of Contents
Advertisement
When the measurement is complete, your blood pressure and pulse are
displayed, and the arm cuff deflates automatically.
If you do not have a session waiting for you to complete on your telehealth
appliance, and you want to measure your blood pressure now, press the
START button on your blood pressure monitor. The arm cuff inflates. When the
measurement is complete, your blood pressure and pulse are displayed, and
the arm cuff deflates automatically.
4. Remove the arm cuff from your arm. If for any reason you need to measure
your blood pressure again, wait at least 10 minutes.
Your measurement is now complete. If you took a measurement during a session,
the bluetooth symbol on your blood pressure monitor blinks five times to indicate
that your measurement was transferred to your telehealth appliance.
If the bluetooth transition success, it will enter Turn Off mode after 60seconds timeout or press On/Off key. .
it is fail, and store the measurement data to memory. At the same time display EC20 for 25seconds, and then turn off.
11 | en
Then the backlight is on, And, announce and display the measurement value.
Robert Bosch Healthcare Systems, Inc
| F.03D.601.424 Rev. A 12/2012
.
Advertisement
Table of Contents
