Paging; Chain Dialing; Clock And Alarm Settings - Philips DECT 122 User Manual

Paging

This feature allows you to locate the handset(s).
Press on the base station. Press any key on the handset to stop ringing
once relocated.

Chain Dialing

If you have entered in your phonebook for example only the main number of a
company without the extension, this feature allows you to add the subnumber
(extension) of a particular person and to dial out this number.
Take the line
open phonebook list
each digit blinks to indicate dialed out.
enter the extension

Clock and Alarm Settings

✦ To set the Date and Time
Press
press Down 1 time
enter the date
Press to display the date and time.
Note: If you are connected to an ISDN line, the date & time may be updated
after each call. Please check the date & time settings in your ISDN system.
✦ To set or change the alarm clock settings
Press
press Down 1 time
SET ALARM
If you select ON ONCE or ON DAILY :
enter the time
Note: When the alarm rings, press any key to stop the alarm.
Paging / Chain dialing / Clock & Alarm Settings
scroll to select
CLOCK/ALARM
enter the time
CLOCK/ALARM
scroll to select*
to confirm.
to dial first part
DATE/TIME
to confirm.
press Down 1 time
to confirm.
All the
subscribed
handsets ring.
To delete a
character use
BACK.
*Choose :
OFF or
ON ONCE or
ON DAILY
The alarm
rings for at
most 1 minute
and ALARM
is shown in
idle mode.
17