Main Unit And Remote Control; Functional Overview - Philips MX5500D Quick Use Manual

Functional Overview

Main unit and remote control

1
STANDBY ON
– Switches to Eco Power standby mode or turns
on the system. (see page 42)
– *Switches to standby mode. (see page 42)
2
Disc trays 1~5
OPEN•CLOSE 0 (DISC1~5)
3
– Opens/Closes the individual disc tray.
4
iR SENSOR
– Point the remote control towards this sensor.
5
MEDIA SLOT
– Plug the memory card into the PC card adaptor
and insert it into the media slot for viewing. (see
page 29)
EJECT 0
6
– Ejects the memory card from the slot.
7
Speaker display panel
8
System display panel
9
TUNING
– Switches between frequency tuning and preset
tuning mode. (see pages 37-38)
0
PROG (PROGRAM)
– DISC: starts programming. (see pages 26-27)
– TUNER: starts *automatic/ manual preset
programming. (see page 38)
– CLOCK: selects 12- or 24-hour clock display.
(see page 20)
18
(illustrations on page 3)
* = Press and hold the button for more than two seconds.
!
ÉÅ PLAY•PAUSE
DISC: starts/pauses playback. (see page 25)
–
– TUNER: *enters Plug & Play mode and/or starts
preset radio station installation (only on the
main unit.) (see page 37)
Ç STOP
– Exits an operation.
– DISC: stops playback or *clears a program.
(see page 25, 27)
– TUNER: *erases a preset radio station.
(see page 38)
S SEARCH T (PREV/NEXT)
– DISC: *searches backward/forward or selects a
track. (see page 25)
– TUNER: tunes the radio frequency up/down or
selects a preset radio station. (see pages 37-38)
(On the remote, it can only tunes the radio
frequency up/down.)
– CLOCK: sets the minutes and hours.
(see pages 20, 39)
@
SEATING (only available in Multi-channel
mode)
– Turns on/off the seating control diagram on the
TV. Use the VOLUME control on the main unit
or joystick on the remote to select the desired
seating position. (see page 22)
#
SURROUND (SURR.)
– Selects multichannel surround, 3D sound or
stereo mode. (see page 41)
$
SOURCE
– Selects the relevant active mode : TV/AV, DISC,
MEDIA SLOT, TUNER, AUX or DI.
– DISC: toggles between DISC and MEDIA SLOT.
– TUNER: toggles between FM and AM band.
– AUX/DI: toggles between AUX and DI (Digital
Input) mode.
%
CLOCK•TIMER
– *Enters clock or timer setting mode.
(see pages 20, 39)
– Shows clock display for a few seconds.
(see page 20)