Set The Sleep Timer; Listen To An External Device; Product Information - Philips MCM103 User Manual

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
»
When sleep timer is activated, the
display shows
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] is
displayed.
»
When sleep timer is deactivated,
disappears on the display.

Listen to an external device

You can listen to an MP3 player through this unit.
1
Press MP3 LINK to select MP3 LINK
source.
2
Connect the supplied MP3 link cable to:
MP3 LINK jack (3.5 mm) on the unit
the headphone jack on an external
device
3
Start to play the device (see the device
user manual).
16 EN
.
10 Product
information
Note
Product information is subject to change
without prior notice.
Rated Output Power 2X5W RMS
Frequency Response
Signal to Noise Ratio >65dB
Aux Input
Disc
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response 60Hz -16kHz (44.1kHz)
S/N Ratio
Tuner
Tuning Range
Tuning Grid
Sensitivity
- Mono, 26 dB S/N
Ratio
Search Selectivity
60 - 16kHz, ±3dB
0.5 V RMS 20kohm
Semiconductor
12cm/8cm
CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
24Bits / 44.1kHz
<1%
>65dBA
FM: 87.5 - 108 MHz
50 KHz
< 22 dBf
< 36 dBu