Recording - Philips FW585C User Manual

RECORDING

MINI HIFI SYSTEM
PROGRAM
REPEAT
NEWS T.A.
STANDBY
ON
CLOCK/
TIMER C D 1 • 2 • 3
PROG
SEARCH • TUNING
OPEN
TAPE 1
22
SHUFFLE STEREO
BACK
TIMER REC
FRONT HSD
AM MW FM LW
60Hz 250Hz 500Hz 4KHz 8KHz
1KHz 2KHz
FM • AM TAPE 1 • 2 CDR
CD TUNER TAPE AUX VOLUME
A. REV
SIDE A•B PRESET
STOP•CLEAR PLAY PAUSE PREV NEXT
SOUND NAVIGATION
DIGITAL SOUND DYNAMIC BASS
CONTROL BOOST
Notes:
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr0 2 ).
– The tape is secured at both ends with
DOLBY B
NR
leader tape. At the beginning and end of
tape, nothing will be recorded for six to
seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
– If " CHECK TAPE " is displayed, the
protection tab has been broken. Put a
OPEN
piece of clear adhesive tape over the
opening. Do not cover the Cr0 2 tape
detection hole when covering the tab
TAPE 2
opening.
Recording from other sources
(only on tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
the open side downward.
3 (For Tape Deck 2 only)
Press SIDE on remote control to select
the recording side.
™ The or flag will be
BACK FRONT
displayed, depending on the side
selected.
4 Press A. REV to select the playback
mode ( å å å å å or ∂ ∂ ∂ ∂ ∂ ).
5 Press CD, TUNER or AUX.
• Start playback of the selected source.
6 Press REC to start recording.
™ The flag starts flashing.
REC
7 PressÇto stop recording.
Notes:
– Only å å å å å or ∂ ∂ mode is available ∂ ∂ ∂
during recording.
– During recording, it is not possible to
listen to another source.