Troubleshooting - Philips Streamium MC-i250 User Manual

Wireless broadband internet audio system
Hide thumbs Also See for Streamium MC-i250:
Table of Contents

Advertisement

Troubleshooting

RADIO RECEPTION
Radio reception is poor.
GENERAL
The system does not react when buttons
are pressed.
Sound cannot be heard or is of poor
quality.
The left and right sound outputs are
reversed.
The remote control does not function
properly.
The timer is not working.
Not all buttons are lit.
The Clock/Timer setting is erased.
Visit our website "http://My.Philips.com" for online help.
38
– If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
– Increase the distance between the Micro System
and your TV or VCR.
– Remove the AC power plug for one minute.
Then reconnect and switch on the system again.
– Adjust the volume.
– Disconnect the headphones.
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped
into the speaker terminal.
– Make sure the MP3-CD was recorded within
32-256 kbps bit rate with sampling frequencies
at 16 kHz, 22.05 kHz, 48 kHz, 44.1 kHz or
32 kHz.
– Check the speaker connections and location.
– Select the source (CD or TUNER, for example)
before pressing the function button (É,í,ë).
– Reduce the distance between the remote
control and the system.
– Insert the batteries with their polarities
(+/- signs) aligned as indicated.
– Replace the batteries.
– Point the remote control directly toward the
IR sensor on the front of the system.
– Set the clock correctly.
– Press TIMER ON/OFF to switch on the timer.
– Press DIM to select DIM OFF display mode.
– Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents