PARTS AND HARDWARE: BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware listed. If anything is missing, please DO NOT call the store or return the product to them. Contact us for assistance. Most problems are resolved without you needing to leave home. When emailing or calling us, please have this instruction manual and your product model number ready.
Page 3
STEP 1 - PICTURE 1: Attach the TWO OUTSIDE DRAWER TRACKS (A1 and A2) to the TWO END PANELS (B1, B2) using SIX ½” SCREWS (C) (three screws for each track). Line up the first hole behind the track wheel so that all three screw holes on (B) match up to holes on (A), and the narrower end of (A) lines up with the end of the track board.
Page 4
STEP 6 - PICTURE 6: Attach the SECOND END PANEL (B1) to the TWO TOP RAILS (E) and SIX SHELF RAILS (F) using EIGHT 1¾” BOLTS (G). STEP 7 - PICTURES 7A, 7B and 7C: Note: This step can also be completed with the table upside down to make it easier.
Page 5
READ ALL INSTRUCTIONS before use of this changing table. Keep instructions for future use. Use only the changing pad provided by Badger Basket. Do not use the changing table if it is damaged or broken. FALL HAZARD - To prevent death or serious injury, always keep baby within arm’s reach.