Network Security - Dell S3840cdn User Manual

OCSP
CRL Retrieval
Smart Card
Select from Off and On - PKI Only.
Select On - PKI Only to use smart cards only for the security feature, not for
authentication or job control.
Smart Card Certificate Verification
Set whether or not to verify the smart card certificate when a user uses the smart card.
When this setting is enabled, the owner of the smart card is verified not only by PIN code
verification but by certification verification of the smart card and private key match. In this
case, the upper level CA certificate of the smart card certification must be registered on
the machine.
When this setting is disabled, the owner of the smart card is verified by PIN code
verification.

Network Security

FIPS 140-2
Select whether or not to enable FIPS140 validation mode.
NOTE:
• Although the following features work with the FIPS140 validation mode, using them is not
recommended because they use encryption algorithms which do not comply with FIPS140.
- SMB (Scan To/SMB authentication) (using DES and MD4 used in SMB authentication
(NTLMv2/NTLMv1/LM))
- LDAP Authentication (using DES and MD4 used in NTLM authentication selected by the
automatic selection "SASL-Bind (NTLM)
- SMTP Authentication (using DES and MD4 used in NTLM authentication selected by the
automatic selection "NTLM
- HTTP Authentication for External Access (using DES and MD4 used in NTLM authentication
selected by the automatic selection "NTLM
- PDF Direct Print (using RC4 required in decrypting a PDF document encrypted with a
password (RC4))
Send Query to Responder With
Responder URL
Communication Timeout
Auto Retrieval of CRL
Communication Timeout
CRAM-MD5
Select how to access an OCSP
responder from URL as Specified in
Certificate or URL as Specified by
Administrator.
Enter the URL of an OCSP responder
when URL as Specified by
Administrator has been selected for
Send Query to Responder With. Up to
255 characters are allowed.
Specify a time-out value for OCSP
communication from 5 to 60 seconds
in 1 second increments.
Select whether or not to automatically
retrieve a CRL.
Specify a time-out value to retrieve a
CRL from 5 to 60 seconds in 1 second
increments.
Simple-Bind")
LOGIN PLAIN")
Digest Basic authentication")
Dell Printer Configuration Web Tool
117
|