ViewSonic VS11280 Service Manual page 9

Do the following to adjust the display setting:
1. To display the Main Menu, press button [1].
VA703m/VA703mb
NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable
through the OSD timeout setting in the setup menu.
2. To select a control to adjust, press ▲ or▼ to scroll up or down in the Main Menu.
3. After the desired control is selected, press button [2]. A control screen like the one shown below appears.
4. To adjust the control, press the up ▲ or down ▼ buttons.
5. To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to the LCD display.
(Look for instructions on "changing the refresh rate" in the graphics card's user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely
visible. (The black border around the edge of the screen should barely touch the illuminated "active area" of the LCD
display.)
VA703b
The line at the bottom of the screen shows
the current functions of buttons 1 and 2:
Exit or select the Brightness control.
9