Tool name / nr Tool
Tool to install the crankshaft spacer.
(A) YSST-
266 (b)
YSST-267
These tools are using to install the crankshaft.
Tool for removing the crankshaft. YSST-
265
This tool is used to remove the crankshaft from the
crankcase
Clutch Hub Fixer
YSST-733
This tool is used to lock the clutch hub while installing or
removing the locking nut of the clutch hub.
Lamp flicker
This instrument is used to check the ignition timing.
Manometer
This instrument is used to measure the compression of
the engine
Scraper
YSST-612
This tool is used to scrape the tip seal crankcase mating
surface.
Compressor valve spring
YSST-603
This tool is used to remove and install the valve and valve
spring.
HERRAMIENTAS ESPECIALES
Illustration
(A)
1-7
(B)