Table of Contents
Advertisement
5. Specifications
5.1.
Electrical
Electrical Specifications:
Input Voltage (Operating)
Input Voltage (Full Load)
Input Current
Output Power
No Load Operating Current
Sleep Current (All Rails Off)
Efficiency
Individual Supply Outputs
5.0 Volts +/- 2%
3.3 Volts +/- 2%
12.0 Volts +/- 2%
5.0 Volts Standby +/- 2%
-12.0 Volts +/- 10%
Electraical I/O Specifications
ACC Input Threshold
ACC Input Impedance
MB Power Switch Output Drive
AUX Output Drive
User Switch Pull-Up Drive
Serial Port Rx/Tx
Supervisor Specifications (Basic Mode)
P1 - Countdown Timer Range
P2 - Low Voltage Cutout Range
Operating Temperature Range
Controlled Temperature Range
MB Turn On Delay
MB Power Switch Duration
Max Shutdown Timer Range
5.2.
Mechanical
Mechanical Specification
Board Dimmensions
Mounting hole corridnates (in)
Mounting hole size (in)
Board Thickness (in)
DSATX Manual
6-24 Volts Non-Regulated
8-16 Volts Non-Regulated
20A (20A mini-blade fuse)
220 Watts Max
< 70mA
< 4mA
> 95%
Max Output Current
12 Amps Nominal, 13 Amps Peak
10 Amps Nominal, 11 Amps Peak
12 Amps Nominal, 15 Amps Peak
1.5 Amps
100 mA
Low = < 4V, High = >7V (30V Max)
100k Ohms
Open Collector, 50mA Max
Open Collector, 50mA Max
10k Ohms to 5V
Low = < 0.7V, High = >2V (5V Max)
0-20 minutes (10 minutes default)
10-12 volts (11 volts default)
-40 to +90 degrees Celsius
-10 to +55 degrees Celsius
1 second
1 second
90 seconds
4.15"L x 3.5"W x 1.0"H (106x99mm)
(0.2, 0.2) (0.2, 3.3) (3.5, 3.3) (3.5, 0.2)
0.125
0.062
Copyright 2006 Mpegbox.com
Page 11 of 13
Advertisement
Table of Contents
