Line-In Recording; Recording Via Xlr; Charge The Xlr Adapter; Start An Xlr Recording - Philips DVT7500 User Manual

Line-in recording

If you don't want to use your device's built-in
microphones, you can also record via an external
recording channel. Simply connect an external
microphone or an audio equipment's audio output, such
as the audio output of a radio, CD player, or DVD player,
to your Voice Tracer by using a stereo audio cable.
Note
• When you connect an external recording channel
to your Voice Tracer, the built-in microphones are
disabled. However, you can activate multichannel
recording as described in
• The plug of the audio cable must be a stereo plug.
• Before you start line-in recording, adjust the volume
of the sound source to a suitable level. Too low or
too high volume levels might result in poor recording
quality.
1
Connect the supplied stereo audio cable to the line-
in jack of your Voice Tracer and to the line-out jack of
your external recording channel.
2
Start recording as described in

Recording via XLR

Connect your audio equipment to your Voice Tracer via
the supplied XLR adapter to record professional high-
quality audio recordings.
Note
• When you connect an external recording channel
to your Voice Tracer, the built-in microphones are
disabled. However, you can activate multichannel
recording as described in

Charge the XLR adapter

Before you start recording via XLR, first charge the
supplied XLR adapter. The adapter needs about two
hours to be fully recharged.
To charge the XLR adapter:
• Connect the XLR adapter to your computer via a USB
cable.
X The charging indicator on the left side of the XLR
adapter illuminates red.
X When the adapter is fully recharged, the charging
indicator illuminates green.
Multichannel recording.
Record a file.
Multichannel recording.

Start an XLR recording

1
Place your Voice Tracer into the supplied XLR
adapter.
2
Connect the audio cable of the XLR adapter to your
Voice Tracer's XLR jack.
3
Turn on the XLR adapter by pushing the On/Off
switch on the left side of the adapter to the On
position.
X The recording indicator on the left side of the XLR
adapter illuminates red.
4
Connect an XLR cable to your Voice Tracer's XLR
adapter and to the XLR output of your audio
equipment.
5
Start recording as described in
Note
• If the XLR cable is unplugged from the external
recording channel, Voice Tracer will automatically
save your current recording.
• If the power of your XLR adapter is low, Voice Tracer
will automatically save your current recording. In
this case, recharge the battery of the XLR adapter to
continue recording.
Record a file.
Recording 11