Applying A Vacl To A Vlan; Verifying Vacl Configuration - Cisco Nexus 5000 Series Configuration Manual

Configuring VACLs
Command or Action
Step 4
switch(config)# copy running-config startup-config

Applying a VACL to a VLAN

You can apply a VACL to a VLAN.
SUMMARY STEPS
1. switch# configure terminal
2. switch(config)# [no] vlan filter map-name vlan-list list
3. (Optional) switch(config)# show running-config
4. (Optional) switch(config)# copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 switch# configure terminal
Step 2 switch(config)# [no] vlan filter map-name
vlan-list list
Step 3 switch(config)# show running-config
Step 4 switch(config)# copy running-config
startup-config

Verifying VACL Configuration

To display VACL configuration information, perform one of the following tasks:
SUMMARY STEPS
1. switch# show running-config aclmgr
2. switch# show vlan filter
3. switch# show vlan access-map
Cisco Nexus 5000 Series NX-OS Security Configuration Guide
92
Purpose
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters configuration mode.
Applies the VACL to the VLANs by the list that you specified. The
no option unapplies the VACL.
The vlan-list command can specify a list of up to 32 VLANs, but
multiple vlan-list commands can be configured to cover more than
32 VLANs.
(Optional)
Displays ACL configuration.
(Optional)
Copies the running configuration to the startup configuration.
Applying a VACL to a VLAN
OL-20919-01