Configuring Initial Settings With Setup Wizard - Sony HAW-EIBU Installation Manual

3
Click [OK].
The settings are applied.
Configuring dual display settings
You can connect multiple monitors to the unit and use
them as a single display.
Be sure to connect the monitors beforehand.
1
Right-click a blank area of the desktop, and click
[Screen resolution].
2
Click the [Multiple displays] setting, and select
[Extend these displays].
3
Drag the displays under [Change the appearance of
your displays], and match the positions of displays 1
and 2 with the actual positions of the monitors.
4
Click [OK].
The settings are applied.
Configuring Initial Settings with
Setup Wizard
Setup Wizard starts automatically when the desktop
screen is displayed for the first time.
1
Click [Next].
Note
You can change the display language for Setup
Wizard. To change the language, select a language in
the language selector at the bottom left, and click
[OK] in the dialog box that appears to restart Setup
Wizard automatically.
2
Verify the computer name and configure the domain
settings, and click [Next].
Notes
• The computer name was configured in the
"Configuring Initial Windows Settings" procedure.
You can change the name here if necessary.
• Configuration of the domain settings is not
required.
• Network Video Recorder must be restarted after
changing the computer name and domain settings.
After Network Video Recorder restarts and you log
in, Setup Wizard will appear automatically.
3
Select [All-In-One] or [Recording], and click [Next].
• [All-In-One]: Install all components onto the unit.
Select this when configuring a system with a single
Network Video Recorder.
21