Advertisement
Quick Links
DMX3
3 channel DMX controller for LED lighting
M A N U A L
V E R S I O N
1 . 0
2 9 - 0 2 - 1 2
Due to continuous product development, please ensure that you have downloaded
the latest instruction manual for this product from the Kam website at www.kam.co.uk
For the latest updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc 2011. E&OE.
M
A
D
E
I
N
C
H
I
N
A
Advertisement
Related Manuals for KAM dmx3
Summary of Contents for KAM dmx3
- Page 1 For the latest updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
- Page 2 Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you.
- Page 3 Important note: this product is a three channel RGB controller and will only control three channel RGB effects. Channel 1 = red Channel 2 = green Channel 3 = blue Preset button / 9 preset colours Built-in macros Blackout function Sound-to-light activation Variable sound sensitivity Manual RGB...
- Page 4 Strobe Selecting the strobe function. Press the Strobe button (the LED will illuminate to confirm the function selection) Use fader 2 to adjust the flash rate; 0% = slow / 100% = fast. Chases This function allows the user to select one of the built-in chase programs. Press the Chases button (the LED will illuminate to confirm the function selection).