Listening To Music Via Airplay; Playing A Song From Itunes/Iphone - Yamaha NP-S303 Owner's Manual

Listening to music via AirPlay

You can use the AirPlay function to play iTunes or iPhone music files via a network.
iTunes
PC
Wireless
iPhone
NOTE
• To use this function, the unit and your PC, iPhone must be connected to the same router (page 20).
You can verify whether the network parameters (such as the IP address) are properly assigned to
the unit under "Network" (page 42) in the Setup menu.
• If the iPhone does not recognize the unit, check your network environment (such as the router)
(page 20).
• For information on supported iPhones, please refer to "Supported devices and file formats"
(page 52).
34
This unit
router

Playing a song from iTunes/iPhone

Follow the procedure below to play the music from iTunes or iPhone on the unit.
1
Start iTunes, or display the Music playback screen on the iPhone.
Once the iTunes or iPhone recognizes the unit, the AirPlay icon appears.
iOS 10 (display example)
NOTE
• If the icon does not appear, make sure that the unit and the PC or iPhone are connected to
the router properly.
2
On the iTunes or iPhone, click (tap) the AirPlay icon, and then select
"NP-S303 XXXXXX" (network name of the unit) as the audio output
device.
NOTE
• You can change the network name of the unit by using the "Network Name" parameter under
"Network" in the Setup menu (page 43).
3
Select a song in iTunes or on the iPhone to start playback.
The unit automatically selects "AirPlay" as the source, and playback starts.
The playback information is shown on the display.
NOTE
• Press DISPLAY repeatedly to switch the type of displayed information (page 38).
• If "Standby (Network Standby)" (page 43)in the Setup menu is set to "On" or "Auto", the unit
will automatically turn on when playback starts on iTunes or iPhone.
• An underscore (_) will be displayed for characters not supported by the unit.
iTunes (display example)