Table of Contents
Advertisement
ENGLISH
8
Warning:
Installing the Wireless USB Adapter
Always install the Wireless USB Adapter drivers from the Installation CD
before you connect the adapter to your PC. (See below)
Installing the Wireless USB Adapter software
Do not connect the Wireless USB Adapter to your PC until the
Setup Wizard asks you to do so.
1 Place the CD included in the box in your computer's drive and
start installing the software.
> The CD should start automatically. If it does not, please double-click "My
Computer", then the drive icon, and finally "Setup.exe" to start the CD.
2 Follow the on-screen instructions for setting up your Wireless
USB Adapter.
3 In the installation program, choose your product from the list
and click 'Next' to continue the installation procedure.
> The following elements will be installed:
• Wireless USB Adapter drivers and tools
• Wireless Base Station Client tool (optional)
• Manual in PDF format
• Readme document and release notes
You only need to install the Wireless Base Station Client Tool if you want to
use the Wireless USB Adapter for configuring a Philips Wireless Base
Station.You do not need it if you just want to install or connect to a
wireless network.
Do not connect the Wireless USB Adapter to your PC until the
Setup Wizard asks you to do so.
IMPORTANT: Only connect the Wireless USB Adapter to a powered USB
port that can provide the adapter with enough electrical power. (see
Technical Specifications)
4 This concludes the installation procedure. Please see the
following sections on connecting, configuring and using the
Wireless USB Adapter.
Should there appear any error messages or requests for additional
information on the screen, then please read the entire manual and the
"Troubleshooting" section. With the information given in this manual, you
should be able to solve any problems with installing and using the Wireless
USB Adapter cable. Please visit our web site www.philips.com if you need
further assistance.
Advertisement
Table of Contents
