Operation Instruction; Connection; Control Buttons - Lenovo L2062W Service Manual

Lenovo Service Manual

2. Operation instruction

2.1 Connection


Connect the video cable from the video card of PC to the monitor..

The power cord should be connected

Press the power button to turn on the monitor, the power indicator will light up.

2.2 Control Buttons

Icon
1
2
3
4
5
6
Control
Input select
DDC-CI
Exit
Auto Adjustment
Decrease - adjusting
NOVO VISION
Increase + adjusting
Menu
/Enter/OK
Power Button
Description
Switches the video input source.DVI/D-SUB
Pressed till 10 seconds, will enable/disable the DDC/CI.
Exit current OSD return to last level.
If there is no any OSD, it is auto configuration.
OSD, it will decrease current value of bar, or move to last
item of menu.
If there is no any OSD,Direct access to Imange Properties
OSD, it will increase current value of bar, or move to next
item of menu.
Active main menu while no OSD display,enter next level on
main menu or sub menu status, or enter last level on
adjustment bar.Continued pressing 10 seconds will lock
menu or un-lock menu.
Power ON/OFF,and power indicator(Blue and Orange).
6
L2062W