Filter criteria
● Only display the first cutting edge
● Only tools that are ready to use
● Only tools with active code
● Only tools that have reached the prewarning limit
● Only locked tools
● Only tools with remaining quantity of ... to ...
● Only tools with residual tool life of ... to ...
● Only tools with unloading marking
● Only tools with loading marking
Note
Multiple selection
You have the option of selecting several criteria. You will receive an appropriate message if
conflicting filter options are selected.
You can configure OR logic operations for the various filter criteria.
References
A description of the configuration options is provided in
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
Procedure
...
Grinding
Operating Manual, 05/2017, A5E40869190
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Tool list", "Tool wear" or "Magazine" softkey.
13.10 Filtering the tool management lists
Manage tools
287