Advertisement
R
epair
< 4 > Disassembling housing
(1) Disassemble shear blade assembly from housing. as illustrated in Fig. 7.
< Note > In case of the machine for USA. and Canada, under cover has to be disassembled, before
removing shear blade assembly.
(2) Disassemble gear assembly from housing. as illustrated in Fig. 8
(3) Disassemble protector from grip by unscrewing 2 tapping screws as illustrated in Fig. 8
(4) Unscrew 2 pan head screws M5x25 as illustrated in Fig. 8
Pan head screw
M5x25
(5) Pull down grip expanding it to the both side as illustrated in Fig. 9
(6) Disassemble housing by unscrewing 9 tapping screws M4 x 20 as illustrated in Fig. 10.
Fig. 9
Pan head screws
Protector
Grip
Housing L
The machine for USA. and Canada
Shear blade assembly
6 arrows are carved also
on the bottom side.
Fig. 7
Pan head screw
M5x25
Gear assembly
Fig. 8
Housing R
Under cover
Pan head screw M5 x 18
Tapping screws
Tapping screws M4 x 20
Fig. 10
P 5 / 7
Advertisement
