Related Manuals for 3xLogic VX-2S-CPIR-W
Summary of Contents for 3xLogic VX-2S-CPIR-W
- Page 1 USER MANUAL| VX-2S-CPIR-W V-Series Solutions | VX-2S-CPIR-W All-in-One Multi-Sensor Camera - User Manual V1.2 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 2 UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.” 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 3: Regulatory Information
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information, see: www.recyclethis.info 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 4: Safety Instruction
If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 5 The foam ring around the lens must be seated flush against the inner surface of the bubble to isolate the lens from the IR LEDS. Fasten the dome cover to camera body so that the foam ring and the dome cover are attached seamlessly. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 6: Table Of Contents
Adding a VX-2S-CPIR-W Camera to VIGIL Client ....................18 Adding a VX-2S-CPIR-W Camera to VIGIL VCM....................19 Adding a VX-2S-CPIR-W Camera to 3xLOGIC View Lite II Mobile (Android and iOS) ......... 20 Adding a VX-2S-CPIR-W Camera to 3xCLOUD Cross-Platform Web Client ............21 5 STANDARD NETWORK CONNECTIONS....................... - Page 7 Security Service ..............................53 8.5 U ............................... 54 ANAGEMENT User Management ............................. 54 Online Users ............................... 56 9 NETWORK SETTINGS ............................57 9.1 C ..........................57 ONFIGURING ASIC ETTINGS 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 8 Configuring Alarm Input ............................ 92 Configuring Alarm Output ..........................93 Handling Exception ............................93 Configuring Other Alarm ........................... 94 13 STORAGE SETTINGS ............................97 13.1 C ..........................97 ONFIGURING ECORD CHEDULE 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 9 14.2 3 LOGIC ................................104 Status ................................104 Site Information ............................... 105 Maintenance ..............................106 Advanced Settings ............................106 15 PLAYBACK ..............................108 16 PICTURE ................................ 110 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 10: System Requirements
RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 8.0 and newer, Mozilla Firefox 5.0 and newer, Google Chrome 18 and newer. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 11: Camera Setup Options
The 3xLOGIC VSX Setup Tool (iOS and Android) can be installed on a mobile device running Android or iOS and has been optimized for use in all DHCP-enabled networks for both wireless and wired configurations. This app scans the camera’s QR code to establish a connection with the camera and pushes configured settings to the camera via the cloud. -
Page 12: Non-Dhcp Networks
(required DHCP) cannot be used to configure the camera. 1. REQUIRED - 3xLOGIC All-in-One PC Setup – To utilize this tool in this network environment, the tool must be installed on a Windows PC which is networked with the cameras. The app then auto-detects the camera at which point an appropriate IP address can be assigned to the camera to establish external internet connectivity. -
Page 13: Camera Setup
3.1 3xLOGIC VSX Setup Tool (iOS and Android) The 3xLOGIC VSX Setup Tool (iOS and Android) can be installed on a mobile device running Android or iOS and has been optimized for use in all DHCP-enabled networks for both wireless and wired configurations. This app scans the camera’s QR code to establish a connection with the camera (camera must have external internet connectivity) -
Page 14: Vsx Setup Tool - Wired Connection Setup
VSX SETUP TOOL - WIRED CONNECTION SETUP To setup a camera with wired connection using the 3xLOGIC VSX Setup Tool, follow the below steps: 1. Unbox and install the camera to your network specifications. -
Page 15: Xlogic All - In -One Pc Setup Tool (Windows )
3.2 3xLOGIC All-in-One PC Setup Tool (Windows) The 3xLOGIC All-in-One PC Setup software must be installed on a Windows PC running on the same network segment as the cameras and is intended for use in large-scale deployments (where scanning individual cameras with the mobile app would be cumbersome) or for non-DHCP networks with wired configuration. -
Page 16: 3Xlogic All-In-One Pc Setup Tool - Wired Connection Setup
The Yellow Link LED indicator on the camera will begin flashing once the connection is established. 4. Download, install and launch 3xLOGIC All-in-One PC Setup software on a Windows PC with an external internet connection. The Camera Detection page will deploy. -
Page 17: 3Xlogic All-In-One Pc Setup Tool - Camera Setup
9. Click Finish to exit the app. After both confirmation emails are received, the setup process is complete. Your VX-2S-CPIR-W should be recording to on-board storage (PIR and video motion recording by default) and is ready to be interfaced with the VIGIL VMS. -
Page 18: Quick Start
IP Address/DNS Name and confirm TCP/IP port status. 4. Enter in the VIGIL Connect alias of the desired VX-2S-CPIR-W Multi Sensor Camera (VIGILTest1 used in the below example). Skip this step if using traditional network connection criteria (IP/Port). -
Page 19: Adding A Vx-2S-Cpir-W Camera To Vigil Vcm
Figure 4-2 3. Click the Health Monitor button. 4. Select (left-click) a Server Group from the Server Groups sidebar to. The VX-2S-CPIR-W camera will be added to this group. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 20: Adding A Vx-2S-Cpir-W Camera To 3Xlogic View Lite Ii Mobile (Android And Ios)
10. Fill in all remaining required fields and click OK to add the camera to your list of centrally managed VIGIL Servers/V-Series Cameras. If you experience issues connecting to the VX-2S-CPIR-W Multi Sensor Camera in VCM, confirm the alias that has been entered is correct. If all settings appear to be correct, contact 3xLOGIC for further instruction or reference Tech Tip 140028 VIGIL Connect Troubleshoot Guide for troubleshooting tips. -
Page 21: Adding A Vx-2S-Cpir-W Camera To 3Xcloud Cross-Platform Web Client
Figure 4-5 8. Fill in the remaining required fields and tap Save to save the VX-2S-CPIR-W camera to View Lite II. A user may now add the camera stream to the View Lite viewer using the same process as adding VIGIL Server, VCM or 3xCLOUD networked cameras. - Page 22 (IP Address and Port/VIGIL Connect Alias) you entered is correct. If all settings appear to be correct, contact 3xLOGIC for further instruction or reference Tech Tip 140028 VIGIL Connect Troubleshoot Guide for troubleshooting tips. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 23: Standard Network Connections
To change a camera’s IP address (for non-DHCP environments, networks requiring static IP, etc…), the 3xLOGIC All-in-One PC Setup Utility can be used. See Section 3 for more information on available setup tools and configuration methods. -
Page 24: Networking The Camera - Wan
You can also save the static IP for the camera and directly connect it to the internet (modem) without using a router. Accessing the Camera with Static IP Directly Figure 5-4 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 25: Dynamic Ip Connection
To solve the inconvenience of the dynamic IP, you need to get a domain name from the DDNS provider (E.g. DynDns.com). Please follow the steps below for normal domain name resolution and private domain name resolution to solve the problem. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 26: Normal Domain Name Resolution
2. Access the network camera through the LAN with a web browser or the client software. 3. Enable DDNS and select IP Server as the protocol type. Refer to Configuring DDNS Settings for detailed configuration. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 27: Networking The Camera - Wi-Fi
USER MANUAL| VX-2S-CPIR-W 5.3 Networking the Camera - Wi-Fi The VX-2S-CPIR-W is Wi-Fi capable, allowing for optional wireless connection to the camera. Although the 3xLOGIC VSX Setup app can automatically configure WiFi for the camera, custom WiFi settings are available for configuration. -
Page 28: Wireless Connection In Ad-Hoc Mode
4. Enable the wireless connection function for your PC. 5. On the PC side, search the network and you can see the SSID of the camera listed. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 29: Security Mode Description
SECURITY MODE DESCRIPTION Security Mode Figure 5-13 You can choose the Security Mode as not-encrypted, WEP, WPA-personal, WPA-enterprise, WPA2-personal, and WPA2-enterprise. WEP mode: WEP Mode Figure 5-14 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 30: Wpa-Personal And Wpa2-Personal Mode
EAPOL version - Select the version used (1 or 2) in your access point. CA Certificates - Upload a CA certificate to present to the access point for authentication. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 31: Easy Wi-Fi Connection With Wps Function
NOTE: If you enable the WPS function, you do not need to configure parameters such as Encryption Type nor do you require the networks security passphrase. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 32: Pin Mode
The PIN mode requires a Personal Identification Number (PIN) to be read from either a sticker or the display on the new wireless device. This PIN must then be entered to connect to the network (usually the Network Access Point). 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 33 You can generate the PIN code on the camera side. And the expired time for the PIN code is 120 seconds. 1. Click Generate. 2. Enter the code to the router, in the example, enter 48167581 to the router. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 34: Ip Property Settings For Wireless Network Connection
3. Customize the IPv4 address, the IPv4 Subnet Mask and the Default Gateway. The settings configuration procedure is the same with that of LAN. If you want to be assigned the IP address check the DHCP checkbox. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 35: Accessing The Vx-2S-Cpir-W User Interface
The default username/password is admin/12345. If the camera has already been configured using one of 3xLOGIC’s setup tools (See Section 2 Camera Setup Options), then default credentials will have been changed by the installer (this is a standard security precaution enforced by the setup tools). - Page 36 USER MANUAL| VX-2S-CPIR-W Download and Install Plug-in Figure 6-2 Install Plug-in (1) Figure 6-3 Install Plug-in (2) Figure 6-4 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 37: Live View
PTZ functions are supported or an external pan/tilt unit has been installed). Preset Setting/Calling: Set and call the preset for the camera (if supports PTZ preset functionality is supported or an external pan/tilt unit has been installed). 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 38: Starting Live View
Local Configuration page. To configure remote scheduled recording, please refer to Section 13.1. NOTE: The captured image will be saved as JPEG file or BMP file to the defined destination path. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 39: Operating Ptz Control
For cameras which support lens movement only, the direction buttons are invalid. Icon Description Zoom in/out Focus near/far Iris +/- Light on/off Wiper on/off 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 40: Setting A Preset
You can configure up to 128 presets. CALLING A PRESET This feature enables the camera to point to a specified preset scene manually or when an event takes place. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 41: Setting/Calling A Patrol
Figure 7-6 6. Click OK to save a patrol. 7. Click to start the patrol, and click to stop it. 8. (Optional) Click to delete a patrol. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 42: Network Camera Configuration
E.g., If face detection is enabled and this option is active, 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 43: Configure System Settings
Alarm Output is displayed. The information cannot be changed in this menu and should be used as reference for future maintenance or modification. 1. Enter the Device Information interface: Configuration > System > System Settings > Basic Information. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 44: Configuring Time Settings
1. Enter the Time Settings interface: Configuration > System> System Settings > Time Settings. Time Settings Figure 8-3 2. Select your location’s Time Zone from the drop-down menu. 3. Configure the NTP settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 45 (Optional) Check the Sync. with computer time item to synchronize the time of the device with that of the local PC. Time Sync Manually Figure 8-5 Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 46: Configuring Rs232 Settings
PTZ parameters should always be performed before controlling the PTZ unit. Steps: 1. Enter the RS-485 Port Settings interface: Configuration > System > System Settings > RS485. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 47: Configuring Dst Settings
1. Enter the DST configuration interface: Configuration > System > System Settings > DST DST Settings Figure 8-8 2. Select the start time and the end time. 3. Select the DST Bias. 4. Click Save to activate the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 48: Configuring External Devices
The VCA Resource interface offers you options to enable certain VCA functions according to actual need when several VCA functions are available. It helps allocate more resources to the required functions. VCA Resource Configuration Figure 8-11 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 49: Maintenance
2. Click Browse to select the local upgrade file and then click Upgrade to start remote upgrade. NOTE: The upgrade process will take 1 to 10 minutes. Please do not disconnect camera power during this process. The camera reboots automatically after upgrading. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 50: Log
Cameras can support IR LED, ABF (Auto Back Focus), Auto Defog, or Status LED. You can enable or disable the corresponding service according to the actual need of your surveillance environment. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 51: Security Settings
This function makes it possible for IP filtering/ camera access control. Steps: 1. Enter the IP Address Filter interface: Configuration > System > Security > IP Address Filter 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 52 Click the OK to finish modifying. Delete an IP Address or IP Addresses. Select the IP address and click Delete. 5. Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 53: Security Service
7 failed user name/password attempts (5 times for operator-class users). NOTE: If the IP address is locked, you can retry to login to the device after 30 minutes. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 54: User Management
You can check or uncheck the permissions for the new user. Click OK to finish the user addition. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 55 3. You can check or uncheck the permissions. 4. Click OK to finish the user modification. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 56: Online Users
IP address, and operation time, is displayed in the User List. Click Refresh to refresh the list. View the Online Users Figure 8-23 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 57: Network Settings
2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings and Multicast Address. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 58: Configuring Ddns Settings
In the Domain text field, enter the domain name obtained from the DynDNS website. Enter the User Name and Password registered on the DynDNS website. d. Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 59 IP Server software. ► For US and Canada, you can enter 173.200.91.74 as the server address. NO-IP Steps: Choose the DDNS Type as NO-IP. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 60 Enter the Domain name you registered. d. Enter the User Name and Password. Click Save and then you can view the camera with the domain name. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 61: Configuring Pppoe Settings
For your privacy and to better protect your system against security risks, we strongly recommend the use of strong passwords for all functions and network devices. The password should be 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 62: Configuring Port Settings
The NAT interface allows you to configure the UPnP™ parameters. Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among networking equipment, software and other hardware devices. The UPnP protocol allows devices to 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 63: Configure Advanced Settings
SNMP v2 requires password for access. And SNMP v3 provides encryption and if you use the third version, HTTPS protocol must also be enabled. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 64 1. Enter the SNMP Settings interface: Configuration > Network > Advanced Settings > SNMP. SNMP Settings Figure 9-9 2. Check off Enable SNMPv1, Enable SNMP v2c, Enable SNMPv3 to enable each version, 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 65: Configuring Ftp Settings
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Set the directory structure and picture filing interval. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 66: Configuring Email Settings
Sender: The name of the email sender. Sender’s Address: The email address of the sender. SMTP Server: IP address or host name (e.g., smtp.263xmail.com) of the SMTP Server. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 67 Receiver: The name of the user to be notified. Receiver’s Address: The email address of user to be notified. Email Settings Figure 9-11 Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 68: Platform Access
Select the item on the white list, and click the Edit button. Input the mobile phone number for the white list, check the checkbox of Reboot via SMS, select the alarm for SMS push, and click OK. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 69: Https Settings
Click Create button to enter the creation interface. Create Self-signed Certificate Figure 9-13 Enter the country, host name/IP, validity and other information. Click OK to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 70: Configuring Qos Settings
DSCP refers to the Differentiated Service Code Point; and the DSCP value is used in the IP header to indicate the priority of the data. Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 71: Configuring 802.1X Settings
Enter the user name and password to access the server. Click Save to finish the settings. NOTE: A reboot is required for the settings to take effect. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 72: Video/Audio Settings
Video Type: Set the stream type to video stream, or video & audio composite stream. The audio signal will be recorded only when the Video Type is Video & Audio. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 73: And H.265
The camera needs at least 3 days to adapt to a fixed monitoring scene. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 74: Configuring Audio Settings
For MP2L2, the Sampling Rate and Audio Stream Bitrate are configurable. For PCM, the Sampling Rate can be set. Audio Input: MicIn and LineIn are selectable for the connected microphone and pickup respectively. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 75: Configuring Roi Encoding
Enter the ROI settings interface: Configuration > Video/Audio > ROI. Select the Stream Type for ROI encoding. Check-off Enable under Fixed Region item. Set Fixed Region for ROI. Select the Region No. from the drop-down list. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 76: Display Info. On Stream
Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 77: Image Settings
Saturation describes the colorfulness of the image color, which ranges from 1 to 100. Sharpness describes the edge contrast of the image, which ranges from 1 to 100. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 78 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 79 Rotate: To make a complete use of the 16:9 aspect ratio, you can enable the rotate function when you use the camera in a narrow view scene. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 80: Day/Night Scheduled-Switch
10:00 and end time as 1:00, the day mode will be activated at 10am in the morning and stopped at 1am the next morning. 2. Click Common tab to configure the common parameters applicable to the day mode and night mode. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 81 3. Click Day tab to configure the parameters applicable for day mode. 4. Click Night tab to configure the parameters applicable for night mode. NOTE: The settings saved automatically if any parameter is changed. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 82: Configuring Osd Settings
13. Left align, right align and custom are selectable. If you select custom, you can use the mouse to click and drag text frames in the live view window to adjust their positions. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 83 USER MANUAL| VX-2S-CPIR-W NOTE: The alignment adjustment is only applicable to Text Overlay items. 8. Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 84: Configuring Privacy Mask
Picture overlay enables you to overlay a picture on the image. This function enables users to overlay a company logo on the image. Steps: 1. Enter the Picture Overlay Settings interface: Configuration > Image > Picture Overlay. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 85 Picture Width and Picture Height to the desired size. 6. Click Save to save settings. NOTE: The picture must be in RGB24 bmp format and the maximum picture size is 128x128. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 86: Event Settings
Select Disable for rules if you don’t want the detected objected displayed with the green rectangles. Select disable rules from Configuration > Local Configuration > Live View Parameters- rules. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 87 Click Draw Area. Click and drag the mouse on the live video to draw a motion detection area. Click Stop Drawing to finish drawing one area. (Optional) Click Clear All to clear all of the areas. (Optional) Move the slider to set the detection sensitivity. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 88 Click Save to save the settings. NOTE: Time periods cannot be overlapped. Up to 8 periods can be configured for each day. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 89 Expert Configuration Expert mode is mainly used to configure the sensitivity and proportion of an object in each area for both day/night mode switching. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 90 Steps: 1. Draw the detection area as in the normal configuration mode. Up to 8 areas are supported. 2. Select Scheduled-Switch for Switch Day and Night Settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 91: Configuring Video Tampering Alarm
Steps: Enter the video tampering Settings interface, Configuration > Event > Basic Event > Video Tampering. Video Tampering Alarm Figure 12-7 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 92: Configuring Alarm Input
Refer to Task 3: Set the Linkage Method for Motion Detection in Section 12.1– Configuring Motion Detection You can copy your settings to other alarm inputs. Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 93: Configuring Alarm Output
Check the checkbox to set the actions taken for the Exception alarm. Refer to Task 3: Set the Linkage Method for Motion Detection in Section 12. 1 – Configuring Motion Detection 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 94: Configuring Other Alarm
Locate the external wireless device beside the camera, and go to Configuration > System > System Settings > Remote Control to arm the camera and analyze the wireless alarm. Configuring Wireless Alarm Settings Figure 12-12 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 95 Go to Configuration > Advanced Configuration> System> Remote Control to arm the camera. Arming PIR Alarm Figure 12-14 Emergency Alarm You can press the Emergency button on the remote control to trigger the Emergency Alarm. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
- Page 96 Configuration > Event > Basic Event> Emergency Alarm Setting Emergency Alarm Figure 12-15 Check off the appropriate linkage methods for the Emergency alarm. Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 97: Storage Settings
10:00, and the pre-record time is set as 5 seconds, the camera starts to record at 9:59:55. The Pre-record time can be configured as No Pre-record, 5s, 10s, 15s, 20s, 25s, 30s or not limited. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 98: 10385 Westmoor Drive, Suite 210, Westminster, Co 80021 | Www.3Xlogic.com | (877) 3Xlogic
You can configure the scheduled snapshot and event-triggered snapshot settings in this section. Captured stillshots/pictures can be stored in the local storage or network storage. Steps: Enter the Capture Settings interface: Configuration > Storage > Storage Settings > Capture. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 99 Select the picture format, resolution, quality and capture interval of continuous snapshots. Check the Enable Event-triggered Snapshot checkbox to enable event-triggered snapshots. Select the picture format, resolution, quality, capture interval, and capture number of event-triggered snapshots. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 100: Configuring Net Hdd
Enter the Net HDD settings interface: Configuration > Storage > Storage Management > Net HDD. Add Network Disk Figure 13-6 Enter the IP address of the network disk, and enter the file path. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 101 3. Define the quota for recorded footage and pictures. Input the quota percentage for pictures and for recorded footage. Click Save and refresh the browser page to activate the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 102: Memory Card Detection
3. Click the R/W Lock tab to add a lock to the memory card. With the R/W lock added, the memory card’s read and write capabilities can only be used when it is unlocked. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 103: Configuring Lite Storage
3. Input the storage time in the text field. You can view the memory card’s available storage capacity on the page. 4. Click Save to save the settings. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 104: Open Platform Settings
From the Application interface, a user can manually import and apply the latest VIGIL Server software package. If the camera was setup using one of 3xLOGIC’s available Setup Tools (See Section 3), the latest VIGIL Software will have been automatically applied. -
Page 105: Site Information
Company Name, Site Name, Camera Name, VIGIL Connect Alias and VIGIL Data Port. 3xLOGIC – Site Information Interface Figure 14-3 Site Information Company Name – The name of the company which purchased and deployed the camera. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... -
Page 106: Maintenance
VIGIL Data Port – The VIGIL Data Port. 22801 is the default value. After changing the port number, click Apply to save the new value. MAINTENANCE From the 3xLOGIC – Maintenance interface, a user can reboot the camera or set the camera’s Recording Configuration. 3xLOGIC – Maintenance Interface Figure 14-4 Click the Reboot button to reboot the camera. - Page 107 Activate PIR Alarm LED -Enabling this feature will cause the camera’s Alarm LED to turn red when the PIR alarm is triggered. UPnP Control Enable UPnP – Enable UPnP to allow for automatic port forwarding. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 108: Playback
1. Click Playback on the menu bar to enter the playback interface. Playback Interface Figure 15-1 2. Select the date and click Search. Search Video Figure 15-2 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 109 Set Playback Time Figure 15-4 Progress Bar Figure 15-5 The different colors for video in the progress bar represent the different recording modes. Recording Modes Figure 15-6 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 110: Picture
3. Click Search to display a list of results. 4. Check off desired snapshots and click Download to download the selected images. NOTE: Up to 4000 images can be available in the search index simultaneously. 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC... - Page 111 USER MANUAL| VX-2S-CPIR-W 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC...