Home >
Appendix
> How to Enter Text on Your Brother Machine
How to Enter Text on Your Brother Machine
•
When you must enter text on your Brother machine, a keyboard appears on the LCD.
•
The characters that are available may differ depending on your country.
•
The keyboard layout may differ depending on the operation you perform.
•
Press
to cycle between letters, numbers and special characters.
For certain models, press
letters (such as letters with diacritics).
•
Press
to cycle between lowercase and uppercase letters.
•
To move the cursor to the left or right, press d or c.
Inserting spaces
•
To enter a space, press [Space] or c.
Making corrections
•
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character, and then press
•
To insert a character, press d or c to move the cursor to the correct place, and then enter the character.
•
Press
for each character you want to erase, or press and hold
Related Information
•
Appendix
•
Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
•
Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
•
Set Your Station ID
to select letters, numbers, special characters and additional
. Enter the correct character.
to erase all the characters.
747