Samsung HW-MS6500 User Manual page 24

Installing an additional Sound bar when Sam sung wireless speakers are already in use
1. On the Home screen of the Samsung Multi room app, select Settings (@ )at the top, and then
select "Add Speaker"
- [Samsung] R3 <. SETTINGS
...
~
I
Add Speaker
Alarm
2.
To connect the Sound bar t o
2 Samsung wireless speakers
and configure a surround sound system,
follow t he steps shown below. (You cannot set up a surround sound system using one audio device
and one Soundbar.)
0
Touch = to go to the list of all speakers.
fl
Touch : on the right of the Sound bar model name.
~
Touch Surround Setup. Select Done after dragging the speaker to the desired location.
0
The Surround connection is complete.
Surround Setup
Drag speakers to the desired pO!tltion
ALBUMS
I
Samsung Sound bar .
...
GIOUP
···~ ···~
A.L SPEAKERS
I
[Samsung] R3
Surroundt SurroundA:
I
[Samsun.9J R3
Soundbar
~}
I
l ·amsung Soundbar
NOTE
• To connect an additional SWA-9000S (not supplied), disconnect the Samsung wireless speakers
from the Sound bar to disable the surround sound system. (If connecting the surround speakers
without disconnecting SWA-9000S, sound is played via both the Samsung wireless speaker and the
Surround speaker.)
ENG -18