Panel Facilities And Specifications - Pioneer S-W110S-QL Service Manual

8. PANEL FACILITIES AND SPECIFICATIONS

PANEL FACILITIES
A
A
FRONT PANEL ( )
1
Power Indicator
Illuminates when the power is on.
2
Power switch (POWER)
When pressed, power is turned ON; when pressed again, power is
turned OFF.
3 Level knob (LEVEL)
Sets the subwoofer volume.
÷ Turn the knob slowly from the MIN position.
÷ With this unit, the bass level can be independently set, so do
not turn up the bass on the stereo amplifier .
4 Turnover knob (TURNOVER)
Sets the high limit of the frequency played back by the subwoofer .
÷ Setting Criteria
50Hz ... when the diameter of the left/right speakers is 20-cm or more.
100Hz . when the diameter of the left/right speakers is 10 – 25-cm.
200Hz . when the diameter of the left/right speakers is 12-cm or less.
5 Phase switch (PHASE
When depressed ( 180˚), the output phase becomes the reverse
of the input signal, and when raised (
as the input signal.
÷ Normally, the switch is set to (
But when the sound connection between the subwoofer and
the left and right speakers sounds unnatural, try switching to
180˚ and set the switch in the position where the sound is natural.
1 2
POWER
OFF ON
0˚ / 180˚)
0˚ ), it is in the same phase
0˚ ).
S-W110S-QL, S-W110S-K, S-W150S
3 4
LEVEL TURNOVER
80
PHASE
65 120
50 200
MIN MAX
Hz
5
0 ˚ 180 ˚
19