Before starting this job, detach the lamp cage unit and the filter cover.
1. Removing the top cabinet
1-1. Remove the three screws at the carrying handle side.
1-2. Remove the two screws at the terminals side.
1-3. Detach the terminal door, and remove the four screws off the terminal cover.
1-4. Slowly lift the back of the top cabinet and disconnect the operation key unit connector (KY). Pull up and
away the top cabinet.
1-5. Place the top cabinet upside down. Remove the four screws off the operation key unit. Take out the
operation key unit.
1-2
1-3
Terminal Door
REMOVING OF MAJOR PARTS
1-4
Top Cabinet
(KY)
1-2
11
XG-NV1E
XG-NV1EA
1-1