Programming Device Timers; General Information - Honeywell VISTA-128BPT User Manual

Section 27: Programming Device Timers
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
G e n e r a l I n f o r m a t i o n
Device timers consist of an ON time & an OFF time, along with selected days of the week in which they
are active.
•
There are up to 20 usable timers that can be used to control relay outputs.
•
Your installer will have programmed the appropriate devices into the system (up to 96 devices).
•
Each timer controls a single device (designated as an output number) that you select.
•
For example, timer 1 might be set to turn the porch lights on at 7:00pm and turn them off at
11:00pm.
•
Timer 2 might turn on the air conditioner Monday-Friday at 4:30pm to cool the premises before
you arrive at 5:00pm, and turn it off at 10:00pm when you are retiring for the night.
•
If desired, different timers can control the same device.
•
For example, timer 2 could be used Monday-Friday as in the previous example, and timer 3
could be set to turn the air conditioner on and off at different times Saturday and Sunday.
To enter the device timer menu mode:
Enter your Security Code + # + 83.
OUTPUT TIMER # ?
01-20,00=QUIT 01
06 07:00P 11:45P
PORCH LITE 04
NOTE: See your installer for
device numbers.
00 ENTER OUTPUT#
Up to 20 timers can be programmed. Each timer is identified by a
number 1-20. Enter the desired timer number to be programmed
(1-20).
Press ∗ to accept entry.
If that timer number has already been programmed, a summary
screen will appear.
In this example:
06 =
04 =
PORCH LITE =
07:00PM =
11:45PM =
Press [∗] to continue.
Enter the desired output device number (1-96). As the number is
entered, the device's description will appear.
00
To delete a previously programmed timer, enter 00 as the output
number.
Timer #
Output Device # affected by this
timer
Output Descriptor for Device 4
Start Time;
Stop Time
48