Option 1: Connect to the HDMI jack
HDMI IN
1
Connect an HDMI cable (not supplied)
to the HDMI OUT jack on this Home
Theater System and the HDMI input jack
on the TV.
Note
•
If your device supports HDMI CEC, you can control
compliant devices with a single remote control. (see
'Get started' > 'Use Philips EasyLink').
Tip
•
If the TV has a DVI connection only, connect via
a HDMI/DVI adaptor. Connect an audio cable for
sound output.
•
You can optimize the video output. (see 'Adjust
settings' > 'Video setup' > [HDMI Setup] ).
•
This type of connection provides the best picture
quality.
12
EN
HDMI OUT
Option 2: Connect to the component
video jack
Pr
Pb
Y
1
Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theater System and the
COMPONENT VIDEO input jacks on the
TV.
•
If a progressive scan TV is used, you
may turn on the progressive scan
mode. (see 'Get started' > 'Turn on
Progressive Scan').
Note
•
The component video input jack on the TV might be
labeled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture
quality.
Pr
Pb
Y
VIDEO OUT