Toshiba e-STUDIO477S Service Manual page 102

• During printing, the following messages are displayed.
P=***
W=***
P : Number of test print copies (unit: copies)
W : Print waiting time (unit: second)
• Displays are switched by pressing the [2] key.
T=*** U=***[###]
H=***%
U : *** = Upper heater temperature measurement value [unit:
[***] = Print execution target temperature [unit:
T : Environment temperature measurement value [unit:
H : Environment humidity measurement value [unit: % ]
• Displays are switched by pressing the [2] key.
KTR=*.**
KTR indicate the transfer voltage setting value
• Displays are switched by pressing the [2] key.
KR=*.**
KR : BLACK transfer roller resistance value [unit: uA]
45387101TH Rev.1
• Displays are switched by pressing the [2] key.
• Displays are switched by pressing the [2] key.
]
]
]
• Displays are switched by pressing the [2] key.
5.
6.
ETMP=***UTMP=***
ETMP : Hopping motor constant speed correction parameter
(environment temperature) [unit: DEC]
UTMP : Fuser motor constant speed correction parameter
(fuse target temperature) [unit: DEC]
DB:k**
DB : Develop voltage setting table ID number [unit: HEX]
TR1:k**
TR2:k**
TRl : Transfer voltage parameter VTR1 table ID number [unit: HEX]
TR2 : Transfer voltage parameter VTR2 table ID number [unit: HEX]
Repeat steps 2 to 4 as required.
Pressing the CANCEL key terminates the test. (Returns to the status of step 1.)
4. Maintenance Menu
4-12 /