Table of Contents
Advertisement
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> –host <imm_ip> –user <imm_user_
id> –password <imm_password>
Examples that do use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> –host <imm_ip>
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> –host <imm_ip>
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> –host <imm_ip>
• Bootable media:
You can also build a bootable media using the applications available through the ToolsCenter
website at http://www.ibm.com/ support/entry/portal/docdisplay? brand=5000008&lndocid=
TOOL-CENTER. From the IBM ToolsCenter page, scroll down for the available tools.
Step 5.
Restart the server.
Using the ServerGuide Setup and Installation CD
Use this information as an overview for using the ServerGuide Setup and Installation CD.
The ServerGuide Setup and Installation CD contains a setup and installation program that is designed for
your blade server. The ServerGuide program detects the blade server model and optional hardware devices
that are installed and uses that information during setup to configure the hardware. The ServerGuide
program simplifies operating-system installations by providing updated device drivers and, in some cases,
installing them automatically.
You can download a free image of the ServerGuide Setup and Installation CD or purchase the CD from the
ServerGuide fulfillment website at http://www.ibm.com /systems/management/serverguide/sub.html. To
download the free image, click IBM Service and Support Site.
Note: Changes are made periodically to the IBM website. The actual procedure might vary slightly from what
is in this document.
The ServerGuide program performs the following tasks:
• An easy-to-use interface
• Diskette-free setup and configuration programs that are based on detected hardware
• Device drivers that are provided for the blade server model and detected hardware
• Operating-system partition size and file-system type that are selectable during setup
ServerGuide features
Use this information to determine the ServerGuide features.
Features and functions can vary slightly with different versions of the ServerGuide program. To learn more
about the version that you have, start the ServerGuide Setup and Installation CD and view the online
overview. Not all features are supported on all blade server models.
The ServerGuide program requires a supported IBM blade server that is associated with an enabled startable
(bootable) CD drive. In addition to the ServerGuide Setup and Installation CD, you must have the operating-
system CD to install the operating system.
The ServerGuide program has the following features:
• Sets system date and time
.
Chapter 2
Configuring the blade server
21
Advertisement
Table of Contents
