When Removing A Hdd - Mitsubishi DX-TL5000E Installer Manual

When removing a HDD

1. Push the left end of each screw covers on both sides
step
of the cover to open.
Do not leave the screw cover open for general use.
2. Remove the screws.
step
3. Remove the front covers.
step
• Remove the cover on the right side first.
• Then, push the left side cover to the right to
remove.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Connections
4. Remove the metal part.
step
• Remove 4 screws on the metal part.
5. Pull out the HDD tray halfway.
step
HDD A
6. Disconnect the cables.
step
7. Remove the HDD tray.
step
• Pull out the HDD tray completely.
8. Remove the HDD.
step
• Remove 4 screws which are used to fix the HDD
and its frame.
HDD B
HDD C
21