3. REDUCTION RX
• This function can be used to set whether documents longer than the paper are printed
reduced ("ON"), split ("OFF"), or discarded ("CUT"). However, when sending a document
more than 24 mm (1 inch) longer than the paper, "CUT" is not available. (In this case, the
document is split.)
• The default setting is "ON".
Setting value
Description
ON
Reduction print mode
OFF
100 % RX mode
CUT
Cut mode
• Reduction print mode
It reduces (only the FD direction) and prints so that receiving data will in a recording
paper.
Recor
ding
Length of received
Footer
paper
image
size
Less than 289 mm
290 mm to 385 mm
OFF
386 mm to 570 mm
571 mm to 851 mm
851 mm or more
A4
Less than 285 mm
286 mm to 381 mm
ON
382 mm to 562 mm
563 mm to 839 mm
840 mm or more
Less than 271 mm
272 mm to 387 mm
OFF
388 mm to 534 mm
535 mm to 797 mm
798 mm or more
Letter
Less than 267 mm
268 mm to 381 mm
ON
382 mm to 526 mm
527 mm to 785 mm
786 mm or more
Printing
1 page with 100 %
1 page with (289 mm / image length)% reduction
Divide into 2 pages with 100 %
Divide into 3 pages with 100 %
Divide into 3 pages (or more) with 100 %
1 page with 100 %
1 page with (285 mm / image length)% reduction
Divide into 2 pages with 100 %
Divide into 3 pages with 100 %
Divide into 3 pages (or more) with 100 %
1 page with 100 %
1 page with (271 mm / image length)% reduction
Divide into 2 pages with 100 %
Divide into 3 pages with 100 %
Divide into 3 pages (or more) with 100 %
1 page with 100 %
1 page with (267 mm / image length)% reduction
Divide into 2 pages with 100 %
Divide into 3 pages with 100 %
Divide into 3 pages (or more) with 100 %
S-35