Abbra Home Control Quick Start Manual

For abbra home control; abbra campus; abbralink
Hide thumbs Also See for Home Control:

Advertisement

This Page Intentionally Left Blank
Quick Start Guide
F
OR MODELS
Abbra Home Control
Abbra Campus
AbbraLink
Abbra Home Control
Quick Start Guide

Advertisement

Table of Contents
loading

Summary of Contents for Abbra Home Control

  • Page 1 This Page Intentionally Left Blank Quick Start Guide OR MODELS Abbra Home Control Abbra Campus AbbraLink Abbra Home Control Quick Start Guide...
  • Page 2: Warranty

    If you need further information not covered in this guide, please refer in the first instance to the main Abbra System User Guide available at www.myabra.com. Alternatively, NextAlarm advisors are on hand to assist during office hours. Please email them at abbra@nextalarm.com will apply.
  • Page 3: Step 1 - Inside The Box

    This sensor is not new Abbra System! ignored when the Abbra system is armed in the Home mode so any intrusion is detected. The Abbra line includes Abbra Campus for college students as well as AbbraLink for active seniors that appreciate help being a push button away.
  • Page 4: Step 2 - Activating The Control Panel

    Central Station. later in this guide. Arm – Activate the Abbra home security system, so that if a zone is disturbed, it will trigger an alarm. The Abbra may be armed in Away mode, Home mode, or Instant mode.
  • Page 5: Step 3 - Installing The Wireless Sensors

    72 hours. To attach with as LIVING ROOM and has the HOME & • Pressing the * button will cause the Abbra to announce whether or not it screws, you must open the Magnetic AWAY response type. This means that can currently be armed.
  • Page 6 • home. Both children arrive home from XPR X10 Duplex Receptacle (Qty: 1 _ The serial number of your Abbra Home school on the bus around 3:30PM; a full for each electrical outlet) The X10 Control unit. This can be found on your...
  • Page 7 Now Bill's "waking up" is more peaceful. an event such as arming the Thanks to Abbra, he even gets to lay in system. bed 10 minutes longer. Trigger Options Taking advantage of off-peak hours ARM AWAY (upon AWAY arming).
  • Page 8: User Settings

    Your Abbra system is equipped with the X10 home automation platform. With the addition of the X10 Interface PSC04 which plugs directly into the back of your Abbra control panel in the Make sure all you windows and doors are closed and sensors are undisturbed.

Table of Contents