Active Control; Sound; Ambilight - Philips MatchLine 42PF9986 User Manual

Active Control

The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.The ambient light sensor adjusts
the settings according to the viewing conditions in
the room (only when having selected the Active
control value Medium or Maximum).
& Press the h key on the remote control.
Note: switch off all menus on screen.
é The Active Control menu appears.
"
Press the cursor up/down to select the Active
Control values Off
.
Maximum
The picture settings are being optimised
continuously and automatically which is
displayed by bars.Those menu items can not be
selected.
' Press the cursor right to select
.
Picture

Sound

Sound
TV
Smart sound
Equalizer
Volume
Balance
Loudness
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(3D effect)
AVL
Delta volume

Ambilight

Ambilight
TV
Ambilight
Ambilight mode
Brightness
12
, Minimum , Medium or
Smart
&
Press the cursor right to select
é
Select the menu items in the Sound menu with the cursor
up/down and adjust the settings with the cursor
left/right.Remember, control settings are at normal mid-range
levels when the bar scale is centred.
Smart sound
Select Smart sound to display a list of predefined sound settings,
each corresponding with specific factory settings of Treble and
Bass.
sound in the sound menu.
Notes:
- Some menu items are only available in case of a Cinema Link
configuration and when the Cinema Link is activated. Others are
steered by the audio receiver instead of by the TV. See Cinema Link,
p. 27.
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo
transmission.
- Nicam/Analogue is only selectable in case of Nicam transmission.
The Ambilight menu contains options for controlling the ambient
lighting at the rear of the TV. Using ambient light gives a more
relaxed viewing experience and improves perceived picture quality.
See also the separate supplied brochure on Optimal viewing
experience.
Modes
&
Press the cursor right to select
(Palette)
é
(Saturation) Select the menu items with the cursor up/down and adjust the
settings with the cursors left/right.
Use the on-screen Menu-Info
the menu items.
( Press the cursor up/down to select one of the
predefined picture settings.
§ Press the cursor right to select
.
Display
è
Press the cursor up/down to select
one of the Dual screen demos or
you select Dynamic contrast, Pixel Plus 2,
Digital Noise Reduction or Digital Natural
Motion, the TV screen is divided into two parts:
in the left part the selected picture quality
setting is switched off; in the right part it is
switched on.
Note: Dependent on the input signal, one or more
Dual screen demos may not be selectable.
! Press the h key again to switch off the Active
Control menu.
refers to the personal preference settings of
Personal
Active
Off
.
Sound
.
Ambilight
i
for more information about
Show bars ,
.When