Peripheral Configuration Submenu (Continued); Monitoring Configuration Submenu; Pci Device Submenu - NEC EXPRESS5800/120Ed User Manual

Peripheral Configuration Submenu (Continued)

Feature
Mouse
USB Controller

Monitoring Configuration Submenu

Feature
POST Monitoring
Boot Monitoring

PCI Device Submenu

Feature
PCI IRQ1
—
PCI IRQ14
Choices or
Display Only Description
Disabled Disabled prevents any
Enabled installed PS/2 mouse from
Auto Detect
functioning, but frees up
IRQ12.
Enabled forces the PS/2
mouse port to be enabled
regardless if a mouse is
present.
Auto Detect enables the PS/2
mouse only if present.
OS Controlled is displayed
only if the OS controls the
mouse.
Disabled Disables or enables on-board
Enabled USB controller.
Choices or
Display Only Description
Disabled Selects the point where the POST
OptROM-END monitoring checkpoint is.
POST-END
Disabled Disable or enable the boot
Enabled monitoring feature.
Choices or
Display Only Description
Disabled PCI devices use hardware
Auto Select
interrupts called IRQs. A PCI
IRQ3 device cannot use IRQs already in
IRQ4 use by ISA devices. Use"Auto" only
IRQ5 if no ISA legacy cards are installed.
IRQ6
IRQ7
IRQ9
IRQ10
IRQ11
IRQ12
IRQ13
!RQ14
Your Setting
Your Setting
Your Setting
Configuring Your System 3-9