Active Control; Sound - Philips Flat TV Manual

Color enhancement
When activated, this feature automatically
controls green enhancement and blue stretch.
It makes the colors more vivid.
&
Press the cursor right.
é
Select On or Off in order to activate/de-
activate Color enhancement with the cursor
right.

Active Control

The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.
&
Press the
ACTIVE CONTROL
remote control.
Note: Turn off all menus on screen.
é
The Active Control menu appears.
" Press the cursor up/down to select the Active
Control values
Off
(recommended) or
The picture settings are being optimized
continuously and automatically which is
displayed by bars.Those menu items can not be
selected.
'
Press the cursor right to select
( Press the cursor up/down to select one of the
predefined picture settings.

Sound

Sound
TV
Auto sound
Equalizer
Volume
Balance
Headphone volume
Sound mode
(Alt audio)
(Mono/Stereo)
(3D surround effect)
Audio Only
AVL
Delta volume
button on the
, ,
Minimum Medium
.
Maximum
Auto Picture
Tint
Allows you to select the color mix (hue) of the
picture.
Picture format
This menu item performs the same as the
SCREEN FORMAT
Control. See Use of the Remote Control, p. 4.
§ Press the cursor right to select
Display .
è
Press the cursor up/down to select
one of the Dual screen demos or
you select Dynamic contrast, Pixel Plus, Digital
Noise Reduction or Digital Natural Motion, the
TV screen is divided into two parts: in the left
part the selected picture quality setting is
switched off; in the right part it is switched on.
Note: Dependent on the input signal, one or more
Dual screen demos may not be selectable.
!
Press the
switch off the Active Control menu.
Note: Active Control is not available for digital signals via
.
HDMI.
& Press the cursor right to select
é
Select the menu items in the Sound menu with the
cursor up/down and adjust the settings with the cursor
left/right. Remember, control settings are at normal mid-
range levels when the bar scale is centered.
Auto sound
Select Auto sound to display a list of predefined sound
settings, each corresponding with specific factory
settings of Treble and Bass.
Press the cursor right to enter the list.
Press the cursor up/down to select a predefined sound
setting.
refers to the personal preference settings of
Personal
sound in the Sound menu.
Note: the moment you are in a predefined Auto sound setting
and you modify a setting in the Sound menu, all values of the
menu will overwrite the previously made personal setting.
button on the Remote
Active
button again to
ACTIVE CONTROL
.
Sound
Show bars ,
.When
Off
13