Changing/Disabling Programme Positions - Sony SLV-SE70 Service Manual

Presetting channels (continued)
3
• PROG
Press PROG +/– to select the programme
position.
4
Press to highlight CHANNEL SET,
>/.
then press OK.
PLAY
OK
5
Press repeatedly until the channel you want is displayed.
>/.
PLAY
The channels appear in the following
order:
OK
• UHF B21 - B69
If you know the number of the channel
you want, press the programme number
buttons. For example, for channel 5, first
press "0" and then press "5."
6
To allocate another channel to another programme position, repeat
steps 3 and 5.
7
MENU Press MENU to exit the menu.
20
Getting Started
Changing/
disabling
programme
positions
After setting the channels, you can
change the programme positions and the
station names as you like. If any
programme positions are unused or
contain unwanted channels, you can
disable them.
Changing programme
positions
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the video channel.
1
MENU
Press MENU, then press
highlight LISTS and press OK.
PLAY
OK
2
Press to highlight CHANNEL LIST,
>/.
then press OK.
PLAY
OK
3
Press to highlight the row on which
>/.
you want to change the programme
PLAY
position, then press / .
OK
To display other pages for programme
positions 6 to 60, press
>/.
22
Getting Started
Selected programme
position
TUNER
PROG. 4
CHANNEL SET C 1 2 AAB
AFT ON
FINE TUNING
RETURN
SELECT :
SET : OK
EXIT : MENU
TUNER
PROG. 4
CHANNEL SET C 1 2 AAB
AFT
FINE TUNING
RETURN
SELECT :
CONFIRM : OK
EXIT : MENU
TUNER
PROG. 4
CHANNEL SET C 2 7
AFT
FINE TUNING
RETURN
SELECT :
CONFIRM : OK
EXIT : MENU
MENU
>/.//
OK
to
>/.
LISTS
CHANNEL LIST
TIMER LIST
RETURN
SELECT :
SET : OK
EXIT : MENU
CHANNEL LIST
PROG CH NAME
1 C 1 2 AAB
2 C 0 3 CDE
3 C 5 6
4 C 2 7
5 C 0 9 FGH
SELECT :
MOVE PROG :
ERASE PROG : CLEAR
EXIT : MENU
CHANNEL LIST
PROG CH NAME
1 C 1 2 AAB
2 C 0 3 CDE
3 C 5 6
4 C 2 7
5 C 0 9 FGH
repeatedly.
SELECT :
SET STATION NAME :
CONFIRM : OK
EXIT : MENU
Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions.
The disabled positions will be skipped later when you press the PROG +/–
buttons.
1
In step 5 above, press programme number button "0" twice to display
the number "00" beside CHANNEL SET.
2
Press MENU to exit the menu.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/– or the programme number buttons to select the
programme position for which you cannot obtain a clear picture.
2
Press MENU, then select SETTINGS and press OK.
3
Select TUNER, then press OK.
4
Select FINE TUNING, then press OK.
The fine tuning meter appears.
TUNER
PROG. 4
CHANNEL SET C 2 7
AFT
FINE TUNING
RETURN
SET :
EXIT : MENU
5
Press to get a clearer picture, then press MENU to exit the
?//
menu.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don't proceed for more than a few
minutes.
4
Press until the selected channel row
>/.
moves to the desired programme
PLAY
position.
OK
The selected channel is inserted at the
new programme position and the
intermediate channels are displaced to
fill the gap.
5
Press OK to confirm the setting.
PLAY
OK
6
To change the programme position of another station, repeat steps 3
to 5.
7
MENU Press MENU to exit the menu.
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don't proceed for more than a few
minutes.
1-5
Selected programme
position
21
Getting Started
CHANNEL LIST
PROG CH NAME
1 C 0 3 CDE
2 C 5 6
3 C 1 2 AAB
4 C 2 7
5 C 0 9 FGH
SELECT :
SET STATION NAME :
CONFIRM : OK
EXIT : MENU
continued
23
Getting Started