Installation
1. Install the fuel feed hose (1) to the clamp (2)
if it is removed.
(1) fuel feed hose
(2) clamp
2. Install the fuel tank (3) on the frame.
3. Install the collar and fuel tank bolt (4).
4. Hook the fuel tank band (5).
(4)
(3) fuel tank
(5) fuel tank band
(4) collar and fuel tank bolt
5. Put the breather tube (6) in the steering stem
nut (7).
6. Remove the hose clamp (8) from the breather
tube.
(7)
(1)
(2)
(6) breather tube
(7) steering stem nut
7. Install the shrouds (9) by aligning shroud tabs
(10) with the air cleaner housing cover tabs
(11).
(3)
(5)
(9)
(9) shrouds
(10) shroud tabs
(6)
(8)
(8) hose clamp
(11)
(10)
(11) air cleaner housing cover tabs
Fuel Tank
8. Install the seat (page 33).
9. Install the shroud B bolts (12), collars and
shroud A bolts (13).
Tighten the shroud B bolts to the specified
torque:
3.7 lbf·ft (5 N·m, 0.5 kgf·m)
(12)
(13)
(12) shroud B bolts
(13) collars and shroud A bolts
Servicing Your Honda
35