Reset Counters For Consumable Parts (Function Code: 88) - Brother DCP-L5500D Service Manual

1.3.31 Reset counters for consumable parts (function code: 88)

<Function>
This function is performed to reset the counter for each consumable part in the main PCB
after that has been replaced.
<Operating Procedure>
(1) Press the [8] key twice in the initial state of maintenance mode. "Reset-Laser Unit" is
displayed on the LCD.
(2) Press the [▲] or [▼] key to display the part with the counter to be reset on the LCD, and
press the [Mono Start] key.
(3) "*******OK?" is displayed on the LCD. Press the [Mono Start] key to reset the counter for
the selected part and return the display to the procedure (2). (******* represents the
name of the selected part)
(4) Press the [X] key, and the machine returns to the initial state of maintenance mode.
Selectable parts are shown in the table below.
LCD
Reset-Laser Unit
Reset-Fuser Unit
Reset-PF Kit T1
Reset-PF Kit T2
Reset-PF Kit T3
Reset-PF Kit T4
Reset-PF Kit T5
Reset-PF Kit MP
Reset-LVPS
Part name
Laser unit
Fuser unit
PF kit 1
PF kit 2
PF kit 3
PF kit 4
PF kit 5
PF kit MP
Low-voltage power supply
PCB ASSY
5-59
Counter to be reset
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Printed pages counter
Irregular power supply detection counter
Confidential