Cleaning the Bed Pro Power nozzle sensors and brush roll
To ensure proper UV light function we recommend to regularly clean the nozzle sensors with cotton
swabs for best performance.
Caution! Be careful not to tamper with the UV emitter or try to clean it, as it may be damaged.
Push the brush roll release button. Remove the brush roll. Lift out the brush roll and clean it. Use a pair
of scissors to remove threads. Reassemble the roll, making sure it can spin freely. Close hatch cover.
APAC_ErgoIFU_BED_Master.indd 17
Cleaning the wheels
If the wheels get jammed or need to be cleaned, remove them carefully by using a
flat screwdriver.
17 17
EN
IND
KR
TH
VIET
CH
TW
2016-05-31 11:09:54