Functional Description - Panasonic SF4B V2 series Quick Instruction Manual

3. Functional Description

Location of beam-axis
alignment indicator
Indicator section of emitter
Beam-axis alignment
indicator
Operation indicator
Incident light intensity indicator
Fault indicator
Digital error indicator
PNP indicator
NPN indicator
Emission intensity control indicator
Emission halt indicator
Indicator section of receiver
Beam-axis alignment
indicator
OSSD indicator
Incident light intensity indicator
Fault indicator
Digital error indicator
PNP indicator
NPN indicator
Function setting indicator
Interlock indicator
34
<Common to emitter and receiver>
Description
Lights up in red when device top receives light.
A Blinks in red when device top end receives light.
Lights up in green when control output (OSSD 1 / 2) is ON.
Lights up in red when device upper middle receives light.
B
Beam-axis align-
Lights up in green when control output (OSSD 1 / 2) is ON.
ment indicator
Lights up in red when device lower middle receives light.
(Red / Green)
C
Lights up in green when control output (OSSD 1 / 2) is ON.
Lights up in red when device bottom receives light.
D Blinks in red when device bottom end receives light.
Lights up in green when control output (OSSD 1 / 2) is ON.
When sufficient light is received (Incident light:
130% or more): lights up in green
Incident light intensity When stable light is received (Incident light: 115 to
indicator 130%): OFF
(Green / Orange) When unstable light is received (Incident light : 100
to 115%): lights up in orange
When light is blocked: OFF
Fault indicator (Yellow) Lights up or blinks when fault occurs in the device.
Digital error indicator
Error contents are indicated when device is lockout.
(Red)
PNP indicator (Orange) Lights up when PNP output is set.
NPN indicator (Orange) Lights up when NPN output is set.
<Emitter>
Description
Lights up when device operation is as follows.
Operation indicator [Sequential operation to control output (OSSD 1 / 2).]
(Red / Green) Lights up in red when control output (OSSD 1 / 2) is OFF.
Lights up in green when control output (OSSD 1 / 2) is ON.
Emission intensity con- When light is emitted under short mode: lights up
trol indicator (Orange) When light is emitted under normal mode: OFF
Emission halt indicator When light emission is halt: lights up
(Orange) When light is emitted: OFF
<Receiver>
Description
OSSD indicator Lights up in red when control output (OSSD 1 / 2) is OFF.
(Red / Green) Lights up in green when control output (OSSD 1 / 2) is ON.
Function setting indi- Lights up when blanking function is valid.
cator (Orange) Blinks when the handy controller is connected.
Interlock indicator Lights up when interlock is valid.
(Yellow) Turns OFF when interlock is invalid.
© Panasonic Industrial Devices SUNX Co., Ltd. 2015
Function
Function
Function