Installing A Dimm On A Single Clip Dimm Socket - Asus ESC8000 G3 User Manual

2.4.3

Installing a DIMM on a single clip DIMM socket

Ensure to install CPU, CPU heatsink, and the CPU air duct first before installing the DIMM.
1. Press the retaining clip outward to
unlock a DIMM socket.
2. Align a DIMM on the socket such that
the notch on the DIMM matches the
DIMM slot key on the socket.
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
3. Hold the DIMM on both ends, then
insert the DIMM vertically into the
socket. Apply force to both ends of the
DIMM simultaneously until the retaining
clip snaps back into place, and the
DIMM cannot be pushed in any further
to ensure proper sitting of the DIMM.
Always insert the DIMM into the socket VERTICALLY to prevent damage to the DIMM
notch.
• To install two or more DIMMs, refer to the user guide bundled in the motherboard
package.
• Refer to the user guide for qualified vendor lists of the memory modules.
Removing a DIMM from a single clip DIMM socket
1. Press the retaining clip outward to
unlock the DIMM.
2. Remove the DIMM from the socket.
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM
might get damaged when it flips out with extra force.
ASUS ESC8000 G3
DIMM notch
DIMM slot key Unlocked retaining clip
Locked Retaining Clip
2-17