Cisco Nexus 9000 Series Configuration Manual page 31

Using Modular QoS CLI
Class Map Queue Name
c-out-q3
• Type network-qos class maps
Table 6: System-Defined Type network-qos Class Maps for 4q Mode
Class Map Network-QoS
Name
c-nq-default
c-nq1
c-nq2
c-nq3
• Policy maps
Table 7: System-Defined Queuing Policy Maps for 4q Mode
Queuing Policy Map Name
default-out-policy
Description
Egress queue 3 — QoS group 3
Description
Network-qos class — QoS group 0
Network-qos class — QoS group 1
Network-qos class — QoS group 2
Network-qos class — QoS group 3
Description
Output queuing policy map that is attached to all module ports to which
you do not apply a queuing policy map. The default configuration values
are as follows:
policy-map type queuing default-out-policy
class type queuing c-out-q3
priority level 1
class type queuing c-out-q2
bandwidth remaining percent 0
class type queuing c-out-q1
bandwidth remaining percent 0
class type queuing c-out-q-default
bandwidth remaining percent 100
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
System-Defined MQC Objects
17